Microstructure and mechanical properties of Al-12Si produced by selective laser melting

被引：13

作者：

Fefelov, A. S. ^{[1
]}

Merkushev, A. G. ^{[1
]}

Chikova, O. A. ^{[1
]}

机构：

[1] Ural Fed Univ, FSAEI, HE, 19 Mira St, Ekaterinburg 620002, Russia

来源：

INNOVATIONS AND PROSPECTS OF DEVELOPMENT OF MINING MACHINERY AND ELECTRICAL ENGINEERING | 2017年 / 87卷

关键词：

SINTERING/MELTING SLS/SLM; AL; ALLOY; STRENGTH;

D O I：

10.1088/1755-1315/87/9/092011

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

Al-12Si specimens are produced by selective laser melting (SLM) from gas atomized powders. Installation for the production of powder is original. All specimens were prepared using the EOSINT M 280 device. A fine cellular structure is observed with residual free Si along the cellular boundaries. Room temperature tensile tests reveal remarkable mechanical behavior: the samples show yield and tensile strengths of about 102 MPa and 425 MPa, respectively, along with fracture strain of 12%. The study of crack surface morphology was shown by the example of a sample. Except the spherical pores, the interface of the molten pool also appears on the fracture surface, which indicates a mixture of fragile and ductile fracture. Additionally, the agglomerated silicon group appears also on the fracture surface.

引用

页数：5

共 50 条

[21] Selective laser melting of Al-12Si alloy: Enhanced densification via powder drying
Li, X. P.
O'Donnell, K. M.
Sercombe, T. B.
ADDITIVE MANUFACTURING, 2016, 10 : 10 - 14
[22] Processing defect, microstructure evolution and mechanical properties of laser powder bed fusion Al-12Si alloys
Wang, Wei
Zhang, Yubo
Yue, Congcong
Kong, Xiangqing
Hao, Zhigang
Wang, Tongmin
Li, Tingju
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 26 : 681 - 696
[23] Microstructure and Mechanical Properties of Al-12Si Alloys Fabricated by Ultrasonic-Assisted Laser Metal Deposition
Zhang, Yang
Guo, Yuqi
Chen, Yan
Cao, Yabin
Qi, Haibo
Yang, Shaopu
MATERIALS, 2020, 13 (01)
[24] Effect of Strontium and Magnesium Additions on the Microstructure and Mechanical Properties of Al-12Si Alloys
Hekimoglu, Ali Pasa
Calis, Merve
Ayata, Gizem
METALS AND MATERIALS INTERNATIONAL, 2019, 25 (06) : 1488 - 1499
[25] Laser processing of bulk Al-12Si alloy: influence of microstructure on thermal properties
Espana, Felix A.
Balla, Vamsi Krishna
Bandyopadhyay, Amit
PHILOSOPHICAL MAGAZINE, 2011, 91 (04) : 574 - 588
[26] Microstructure and Mechanical Properties of Al-(12-20)Si Bi-Material Fabricated by Selective Laser Melting
Zhang, Shikai
Ma, Pan
Jia, Yandong
Yu, Zhishui
Sokkalingam, Rathinavelu
Shi, Xuerong
Ji, Pengcheng
Eckert, Juergen
Prashanth, Konda Gokuldoss
MATERIALS, 2019, 12 (13)
[27] Effect of Ti microalloying and laser remelting on the microstructure and mechanical properties of laser powder bed fusion Al-12Si alloy
Hou, Ruosong
Chen, Jianhao
Ren, Xuepeng
Zhao, Yang
Ding, Yufeng
Yu, Zunyue
Ren, Shubin
Qu, Xuanhui
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024, 901
[28] Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser melting
Suryawanshi, Jyoti
Prashanth, K. G.
Scudino, S.
Eckert, J.
Prakash, Om
Ramamurty, U.
ACTA MATERIALIA, 2016, 115 : 285 - 294
[29] The effect of atmosphere on the structure and properties of a selective laser melted Al-12Si alloy
Wang, X. J.
Zhang, L. C.
Fang, M. H.
Sercombe, T. B.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 597 : 370 - 375
[30] Microstructure and mechanical properties of Titanium grade 23 produced by selective laser melting
Nikiel, Piotr
Wrobel, Miroslaw
Szczepanik, Stefan
Stepien, Michal
Wierzbanowski, Krzysztof
Baczmanski, Andrzej
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2021, 21 (04)

← 1 2 3 4 5 →