Harmonic Suppression and Size Reduction of a Low-Profile CP Patch Antenna by Using Nondegenerate Modes

A novel design method of harmonic suppression and size reduction of a circularly polarized (CP) microstrip patch antenna (MPA) is presented by using nondegenerate modes. Based on a circular MPA, a pair of orthogonal modes could be generated between these undesired resonant modes. Then, by loading the shorting pins in a quarter fan-shaped patch, all these undesirable high-order modes could be suppressed between them. After that, the higher and lower modes are moved closer to each other by cutting a long slot at the angle bisector of the fan-shaped patch, providing the CP radiation pattern. Finally, a prototype of this proposed antenna has been designed, produced, and measured to verify the design concept. The experimental results show that the proposed antenna has an impedance bandwidth of 286 MHz (13 774-14 060 MHz), axial ratio bandwidth of 80 MHz (13 900-13 980 MHz), and a left-hand CP peak gain of around 4.8 dBi. Most importantly, the CP antenna has realized the harmonic suppression of about 15 GHz, which has an obvious advantage as compared to the traditional CP MPA. Moreover, the antenna still holds the primary low-profile, single-radiator, simple structure, and high-efficiency simultaneously.