Development of a new lean lubrication system for near dry machining process

被引：23

作者：

Aoyama, T. ^{[1
]}

Kakinuma, Y.

Yamashita, M.

Aoki, M. ^{[2
]}

机构：

[1] Keio Univ, Dept Syst Design Engn, Kohoku Ku, Yokohama, Kanagawa 223, Japan

[2] NSK Ltd, Tokyo, Japan

来源：

CIRP ANNALS-MANUFACTURING TECHNOLOGY | 2008年 / 57卷 / 01期

关键词：

lubrication; cutting; environmental;

D O I：

10.1016/j.cirp.2008.03.094

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The minimal quantity of lubricant supply (MQL) technique has been applied to environment friendly machining processes. However, in the MQL technique, a large volume of oil mist is discharged to the environment. in this paper, a new lean lubrication system for a near dry machining process called "direct oil drop supply system (DOS)" is proposed. The performance of the DOS technique was evaluated by the milling processes. The DOS technique can supply a very small oil drop directly to the cutting edge without making oil mist, and the DOS shows almost same machining performances compared to the MQL technique. (c) 2008 CIRP.

引用

页码：125 / 128

页数：4

共 9 条

[1] Development of a mixture supply system for machining with minimal quantity lubrication
Aoyama, T
[J]. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2002, 51 (01) : 289 - 292
[2] CRAUWELS N, 1998, INT SEM IMPR MACH TO, V2, P703
[3] Heisel U., 1994, Prod Eng, VII, P49, DOI DOI 10.18419/OPUS-7123
[4] INASAKI I, 1998, INT SEM IMPR MACH TO, V1, P43
[5] Dry cutting
Klocke, F
Eisenblatter, G
[J]. CIRP ANNALS 1997 - MANUFACTURING TECHNOLOGY, VOLUME 46/2/1997: ANNALS OF THE INTERNATIONAL INSTITUTION FOR PRODUCTION ENGINEERING RESEARCH, 1997, : 519 - 526
[6] KLOCKE F, 1997, PRODUCTION ENG, V4, P19
[7] High speed drilling and tapping using the technique of spindle through MQL supply
Saikawa, Y
Ichikawa, T
Aoyama, T
Takada, T
[J]. ADVANCES IN ABRASIVE TECHNOLOGY VI, 2004, 257-258 : 559 - 563
[8] Toenschoff H. K., 1994, PRODUCTION ENG, V1, P5
[9] WAKABAYASHI T, 2007, ANN CIRP, V56, P97, DOI DOI 10.1016/J.CIRP.2007.05.025

← 1 →