Investigation of laminar to turbulent transition phenomena effects on impingement heat transfer

被引:9
作者
Isman, Mustafa Kemal [1 ]
Morris, Philip J. [2 ]
Can, Muhiddin [3 ]
机构
[1] Bursa Tech Univ, Dept Mech Engn, Osmangazi Campus, TR-16190 Bursa, Turkey
[2] Penn State Univ, Dept Aerosp Engn, 233C Hammond Bldg, University Pk, PA 16802 USA
[3] Uludag Univ, Dept Mech Engn, Gorukle Campus, TR-16059 Bursa, Turkey
关键词
IMPINGING JET; FLOW STRUCTURE; MASS-TRANSFER; STEADY; MODELS;
D O I
10.1007/s00231-015-1719-8
中图分类号
O414.1 [热力学];
学科分类号
摘要
Turbulent impinging air flow is investigated numerically by using the ANSYS-CFXA (R) code. All computations are performed by considering three-dimensional, steady, and incompressible flow. Three different Reynolds averaged Navier-Stokes (RANS) turbulence models and two Reynolds stress models (RSM's) are employed. Furthermore three different laminar to turbulent transition (LTT) models are employed with the shear stress transport (SST) and the baseline (BSL) models. Results show that predictions of the SST and two RSM's are very close each other and these models' results are in better agreement with the experimental data when all Reynolds numbers used in this study are considered. Secondary maxima in Nusselt number can be seen only if the LTT formula is employed with SST and BSL models.
引用
收藏
页码:2027 / 2036
页数:10
相关论文
共 23 条
[1]   CFD turbulent modelling of jet impingement and its validation by particle image velocimetry and mass transfer measurements [J].
Angioletti, M ;
Nino, E ;
Ruocco, G .
INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2005, 44 (04) :349-356
[2]  
[Anonymous], 2006, US GUID
[3]  
[Anonymous], 2009, ANSYS CFX SOLV THEOR
[4]  
[Anonymous], THESIS
[5]   Unsteady flow and heat transfer analysis of an impinging synthetic jet [J].
Bazdidi-Tehrani, Farzad ;
Karami, Mahdi ;
Jahromi, Mehdi .
HEAT AND MASS TRANSFER, 2011, 47 (11) :1363-1373
[6]   IMPINGING JET STUDIES FOR TURBULENCE MODEL ASSESSMENT .2. AN EXAMINATION OF THE PERFORMANCE OF 4 TURBULENCE MODELS [J].
CRAFT, TJ ;
GRAHAM, LJW ;
LAUNDER, BE .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1993, 36 (10) :2685-2697
[7]   Comparison of various integration to wall (ITW) RANS models for predicting turbulent slot jet impingement heat transfer [J].
Dutta, Rabijit ;
Dewan, Anupam ;
Srinivasan, Balaji .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2013, 65 :750-764
[8]   Numerical simulation of heat transfer from an impinging jet to a flat plate [J].
Hofmann, H ;
Martin, H ;
Kind, M .
CHEMICAL ENGINEERING & TECHNOLOGY, 2004, 27 (01) :27-+
[9]   Measurements on steady state heat transfer and flow structure and new correlations for heat and mass transfer in submerged impinging jets [J].
Hofmann, Herbert Martin ;
Kind, Matthias ;
Martin, Holger .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2007, 50 (19-20) :3957-3965
[10]   Influence of a pulsation on heat transfer and flow structure in submerged impinging jets [J].
Hofmann, Herbert Martin ;
Movileanu, Daniela Luminita ;
Kind, Matthias ;
Martin, Holger .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2007, 50 (17-18) :3638-3648