Selective hydrogenation of benzene to cyclohexene using a suspended Ru catalyst in a mechanically agitated tetraphase reactor

The reactivity on unsupported Ru based catalyst in benzene selective hydrogenation to cyclohexene has been studied. The reaction has been carried out in a tetraphase slurry reactor at 423 K, at 5 MPa, in the presence of two liquid phases: benzene and an aqueous solution of ZnSO4 0.6 mol 1(-1). A detailed study of the influence of the transport phenomena on the reactivity of the catalyst has been carried out. No correlation has been found between the characteristic numbers of Weeler-Weisz and of Carberry mass transport at external liquid/solid interface or into the catalyst pores for both benzene and hydrogen and the selectivity of the catalyst. The main features of the catalysts are the strong dependence between the catalysts preparation procedure and their activity and selectivity. In particular the influence of the alkaline or the earth alkaline hydroxide, employed in the precipitation of the Ru precursor, on the selectivity, has been studied. Hydrogen chemisorption measurements indicate that the amount of weakly adsorbed hydrogen depends on the nature of the base employed in the precipitation step. (C) 1999 Elsevier Science B.V. All rights reserved.