Hygro-thermo-mechanical analysis of spalling in concrete walls at high temperatures as a moving boundary problem

被引：41

作者：

Benes, Michal ^{[1
]}

Stefan, Radek ^{[2
]}

机构：

[1] Czech Tech Univ, Fac Civil Engn, Dept Math, Prague 16629 6, Czech Republic

[2] Czech Tech Univ, Fac Civil Engn, Dept Concrete & Masonry Struct, Prague 16629 6, Czech Republic

来源：

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER | 2015年 / 85卷

关键词：

Concrete; High temperature; Spalling; Hygro-thermo-mechanical analysis; Moving boundary; Thermal stress; Pore pressure; Finite element method; HIGH-PERFORMANCE CONCRETE; FINITE-ELEMENT-ANALYSIS; PORE PRESSURE; HYGROTHERMAL BEHAVIOR; PHYSICAL PHENOMENA; MODELING CONCRETE; COUPLED HEAT; FIRE; TRANSPORT; STRESS;

D O I：

10.1016/j.ijheatmasstransfer.2015.01.050

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

A mathematical model allowing coupled hygro-thermo-mechanical analysis of spalling in concrete walls at high temperatures by means of the moving boundary problem is presented. A simplified mechanical approach to account for effects of thermal stresses and pore pressure build-up on spalling is incorporated into the model. The numerical algorithm based on finite element discretization in space and the semi-implicit method for discretization in time is presented. The validity of the developed model is carefully examined by a comparison between the experimentally determined data stated in literature and the results obtained from the numerical simulation. (C) 2015 Elsevier Ltd. All rights reserved.

引用

页码：110 / 134

页数：25

共 50 条

[41] Large deformation induced deflection analysis of debonded layer structure under hygro-thermo-mechanical loading: a micromechanical FE approach
Hirwani, Chetan Kumar
Akkasali, Naveen Kumar
Kumar, Erukala Kalyan
Panda, Subrata Kumar
ARCHIVE OF APPLIED MECHANICS, 2025, 95 (01)
[42] Identification of the hygro-thermo-chemical-mechanical model parameters of concrete through inverse analysis
Bocciarelli, Massimiliano
Ranzi, Gianluca
CONSTRUCTION AND BUILDING MATERIALS, 2018, 162 : 202 - 214
[43] Thermo-hygro-mechanical meso-scale analysis of concrete as a viscoelastic-damaged material
Xotta, Giovanna
Salomoni, Valentina A.
Majorana, Carmelo E.
ENGINEERING COMPUTATIONS, 2013, 30 (05) : 728 - 750
[44] Mechanical response and spalling sensitivity of air entrained high-strength concrete at elevated temperatures
Khaliq, Wasim
Waheed, Farhan
CONSTRUCTION AND BUILDING MATERIALS, 2017, 150 : 747 - 757
[45] 3D-MESOMECHANICAL ANALYSIS OF CRACKING AND SPALLING OF CONCRETE SUBJECT TO HIGH TEMPERATURES
Perez, A.
Rodriguez, M.
Lopez, C. M.
Carol, I.
COMPUTATIONAL PLASTICITY XII: FUNDAMENTALS AND APPLICATIONS, 2013, : 1015 - 1025
[46] COUPLED ANALYSIS OF TRANSPORT PROCESSES AND MECHANICAL BEHAVIOUR OF CONCRETE AT HIGH TEMPERATURES
Cramer, F.
Ostermann, L.
Kowalsky, U.
Dinkler, D.
COMPUTATIONAL METHODS FOR COUPLED PROBLEMS IN SCIENCE AND ENGINEERING IV, 2011, : 1342 - 1349
[47] Three-dimensional hygro-thermo-mechanical bending analysis of anisotropic skewed parallelogram plates on a tri-parameter foundation using a wavelet method
Yu, Qiang
Xiao, Junfeng
Xu, Hang
THIN-WALLED STRUCTURES, 2024, 201
[48] Explosive spalling and residual mechanical properties of fiber-toughened high-performance concrete subjected to high temperatures
Peng, GF
Yang, WW
Zhao, H
Liu, YF
Bian, SH
Zhao, LH
CEMENT AND CONCRETE RESEARCH, 2006, 36 (04) : 723 - 727
[49] Expansive spalling mechanism of concrete due to high temperature based on developed hygro-thermal-mechanical model by 3D-RBSM-TNM
Miura, Taito
Nakamura, Hikaru
Yamamoto, Yoshihito
ENGINEERING FRACTURE MECHANICS, 2023, 284
[50] A length scale insensitive phase-field model for fully coupled thermo-mechanical fracture in concrete at high temperatures
Wu, Jian-Ying
Chen, Wan-Xin
Zhou, Hao
INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS, 2022, 46 (14) : 2725 - 2753

← 1 2 3 4 5 →