Hygro-thermo-mechanical analysis of spalling in concrete walls at high temperatures as a moving boundary problem

被引：40

作者：

Benes, Michal ^{[1
]}

Stefan, Radek ^{[2
]}

机构：

[1] Czech Tech Univ, Fac Civil Engn, Dept Math, Prague 16629 6, Czech Republic

[2] Czech Tech Univ, Fac Civil Engn, Dept Concrete & Masonry Struct, Prague 16629 6, Czech Republic

来源：

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER | 2015年 / 85卷

关键词：

Concrete; High temperature; Spalling; Hygro-thermo-mechanical analysis; Moving boundary; Thermal stress; Pore pressure; Finite element method; HIGH-PERFORMANCE CONCRETE; FINITE-ELEMENT-ANALYSIS; PORE PRESSURE; HYGROTHERMAL BEHAVIOR; PHYSICAL PHENOMENA; MODELING CONCRETE; COUPLED HEAT; FIRE; TRANSPORT; STRESS;

D O I：

10.1016/j.ijheatmasstransfer.2015.01.050

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

A mathematical model allowing coupled hygro-thermo-mechanical analysis of spalling in concrete walls at high temperatures by means of the moving boundary problem is presented. A simplified mechanical approach to account for effects of thermal stresses and pore pressure build-up on spalling is incorporated into the model. The numerical algorithm based on finite element discretization in space and the semi-implicit method for discretization in time is presented. The validity of the developed model is carefully examined by a comparison between the experimentally determined data stated in literature and the results obtained from the numerical simulation. (C) 2015 Elsevier Ltd. All rights reserved.

引用

页码：110 / 134

页数：25

共 50 条

[31] Identification and Elimination of Hygro-Thermo-Mechanical Stress-Effects in a High-Precision MEMS Pressure Sensor
Sandvand, Asmund
Halvorsen, Einar
Aasmundtveit, Knut E.
Jakobsen, Henrik
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, 2017, 26 (02) : 415 - 423
[32] Hygro-Thermo-Mechanical Vibration and Buckling Analysis of Composite Laminates with Elliptical Cutouts under Localized Edge Loads
Chandra, K. S. Subash
Rajanna, T.
Rao, K. Venkata
INTERNATIONAL JOURNAL OF STRUCTURAL STABILITY AND DYNAMICS, 2021, 21 (11)
[33] Thermo-hydro-mechanical modelling of high performance concrete at high temperatures
Schrefler, BA
Khoury, GA
Gawin, D
Majorana, CE
ENGINEERING COMPUTATIONS, 2002, 19 (7-8) : 787 - 819
[34] Effects of restraint and test configuration on thermo-mechanical stress states in high temperature laboratory tests for spalling in concrete
Abubaker, Abbas M.
Davie, Colin T.
FIRE SAFETY JOURNAL, 2023, 141
[35] A multiphase approach for the analysis of hygro-thermo-chemo-mechanical interactions in concrete at early ages and at high temperature
Gawin, D
Pesavento, F
Schrefler, BA
IUTAM Symposium on Physicochemical and Electromechanical Interactions in Porous Media, 2005, 125 : 91 - 97
[36] Modelling of hygro-thermal behaviour of concrete at high temperature with thermo-chemical and mechanical material degradation
Gawin, D
Pesavento, F
Schrefler, BA
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 2003, 192 (13-14) : 1731 - 1771
[37] Hygro-thermo-mechanical modeling of partially saturated air-entrained concrete containing dissolved salt and exposed to freeze-thaw cycles
Eriksson, Daniel
Wahlbom, David
Malm, Richard
Fridh, Katja
CEMENT AND CONCRETE RESEARCH, 2021, 141
[38] Experimental and Numerical Analysis on Coupled Hygro-Thermo-Chemo-Mechanical Effect in Early-Age Concrete
Zhao, Haitao
Jiang, Kaidi
Hong, Bin
Yang, Rui
Xu, Wen
Tian, Qian
Liu, Jiaping
JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2021, 33 (05)
[39] Hygro-thermo-mechanical based bending analysis of symmetric and unsymmetric power-law, exponential and sigmoidal FG sandwich beams
Garg, Aman
Chalak, H. D.
Belarbi, Mohamed-Ouejdi
Zenkour, A. M.
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 2022, 29 (25) : 4523 - 4545
[40] Spalling sensitivity and mechanical response of an ecofriendly sawdust high strength concrete at elevated temperatures
Khan, Ehsan Ullah
Khushnood, Rao Arsalan
Baloch, Waqas Latif
CONSTRUCTION AND BUILDING MATERIALS, 2020, 258

← 1 2 3 4 5 →