Effect of Manufacturing Process on Micro-Deformation Behavior of Sintered-Silver Die-Attach Material

被引：21

作者：

Suzuki, Tomohisa ^{[1
]}

Terasaki, Takeshi ^{[1
]}

Kawana, Yuki ^{[2
]}

Ishikawa, Dai ^{[2
]}

Nishimura, Masato ^{[2
]}

Nakako, Hideo ^{[2
]}

Kurafuchi, Kazuhiko ^{[2
]}

机构：

[1] Hitachi Ltd, Res & Dev Grp, Ibaraki 3120034, Japan

[2] Hitachi Chem Co Ltd, Tsukuba Res Lab, Ibaraki 3004247, Japan

来源：

IEEE TRANSACTIONS ON DEVICE AND MATERIALS RELIABILITY | 2016年 / 16卷 / 04期

关键词：

Sintered-silver; finite-element analysis; die attach material; simulation; mechanical property; porous structure; NANOSCALE SILVER;

D O I：

10.1109/TDMR.2016.2614510

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

Effects of pressurization and thermal-processing conditions on the deformation properties of sintered-silver sheets, excluding the contribution of the voids, (hereinafter, referred to as "micro-deformation properties") were evaluated. Three types of thin-plate specimen sintered under the different conditions were prepared and these micro-deformation properties were compared. The first type was pressurized at 10 MPa for 10 min in the atmosphere at 573 K, the second type was annealed at 573 K for six hours before pressure processing and pressurized at 10 MPa for 10 min in the atmosphere at 573 K, and the third type was not pressurized and sintering in the atmosphere at 573 K for 10 min. The micro-deformation properties of these specimens were estimated by tensile testing and finite-element analysis (FEA) using a model that reproduces the microporous-structure. The microporous-structure models were made from serial cross-sectional images obtained by focused-ion-beam scanning electron microscope. These estimation results indicate that the micro-deformation properties of sintered-silver sheets do not depend on pressure, but on thermal-process conditions. The estimated micro-deformation properties were compared with those determined by nanoindentation tests and the validity of the estimated micro-deformation properties was confirmed. A deformation property of non-pressurized specimens was predicted by using the estimated micro-deformation properties and the microporous structures obtained from the pressurized specimens. The predicted deformation properties corresponded to experimental one. It is therefore concluded that if the deformation properties and microporous-structure of a sintered-silver specimen under a certain condition are determined, it is possible to predict the porosity dependency of deformation properties by FEA.

引用

页码：588 / 596

页数：9

共 21 条

[1] SMALL PARTICLE MELTING OF PURE METALS [J].