Fabrication of CsxFA1-xPbI3 Mixed-Cation Perovskites via Gas-Phase-Assisted Compositional Modulation for Efficient and Stable Photovoltaic Devices

Over the past few years, significant attention has been focused on HC(NH2)(2)PbI3 (FAPbI(3)) perovskite due to its reduced band gap and enhanced thermal stability compared with the most studied CH3NH3PbI3 (MAPbI(3)). However, FAPbI(3) is sensitive to moisture and also encounters a serious structural phase-transition from photoactive alpha-phase to photoinactive delta-phase. Herein, we first develop a novel FAI gas-phase-assisted mixed-cation compositional modulation method to fabricate Cs(x)FA(1-x)PbI(3) perovskite solar cells (PSCs), and realize the structural stabilization of alpha-phase FAPbI(3) with the incorporation of smaller inorganic Cs+ ions. Through the setting of different Cs+ contents (x = 0, 0.05, 0.10, 0.15, 0.20, 0.25, 0.30, 0.50) along with a moderate FAI vapor deposition process, a series of Cs(x)FA(1-x)PbI(3) films with consistent compositions are fabricated, which perfectly resolves the main blocking problems of the conventional solution approach, such as difficulty in compositional control and rough film morphology. Meanwhile, we find that the Cs+ amount is crucial for generating phase-pure Cs(x)FA(1-x)PbI(3) (0 < x < 0.30) while higher contents result in phase segregation. Consequently, the optimum amount of Cs+ (x = 0.15) is verified, and Cs(0.15)FA(0.85)PbI(3) shows the smallest unit cell volume and good moisture-resistant feature. Correspondingly, the highest power conversion efficiency (PCE) of 14.45% based on Cs(0.15)FA(0.85)PbI(3) PSCs is successfully achieved in this work.