Effect of the equilibrium moisture on the roughness of medium density fiberboards (mdf)

被引：0

作者：

Rolleri, Aldo ^{[1
]}

Roffael, Edmone ^{[2
]}

机构：

[1] Univ Austral Chile, Inst Tecnol Prod Forestales, Valdivia, Chile

[2] Univ Gottingen, Inst Holzbiol & Holztechnol, D-37077 Gottingen, Germany

来源：

MADERAS-CIENCIA Y TECNOLOGIA | 2007年 / 9卷 / 02期

关键词：

roughness; moisture; MDF;

D O I：

10.4067/S0718-221X2007000200007

中图分类号：

TB3 [工程材料学]; TS [轻工业、手工业、生活服务业];

学科分类号：

0805 ; 080502 ; 0822 ;

摘要：

The surface roughness is primarily a function of the raw material properties, but other factors like type and amount of resin, press cycle, sanding and moisture content of the boards may also affect the roughness and other surface properties. In this study the effect of the equilibrium moisture content on medium density fiberboards (MDF) surfaces was evaluate using different raw materials in their surface layers as well as different binders. The statistical analysis confirmed that the relationship between equilibrium moisture content and average roughness are a complex function of interactions between many variables.

引用

页码：171 / 178

页数：8

共 50 条

[11] The Utilizing Rock Salt of Inorganic Filler in Medium Density Fibreboard (MDF) Production [J].

Camlibel, Osman ;

Akgul, Mehmet .

KASTAMONU UNIVERSITY JOURNAL OF FORESTRY FACULTY, 2020, 20 (02) :158-174

[12] MANUFACTURE OF MEDIUM DENSITY FIBERBOARD (MDF) PANELS FROM AGRIBASED LIGNOCELLULOSIC BIOMASS [J].

Akgul, Mehmet ;

Uner, Birol ;

Camlibel, Osman ;

Ayata, Umit .

WOOD RESEARCH, 2017, 62 (04) :615-624

[13] Medium-density Fiberboard (MDF) and Edge-glued Panels (EGP) after Edge Milling - Surface Roughness after Machining with Different Parameters [J].

Sedlecky, Miroslav ;

Kvietkova, Monika Sarvasova ;

Kminiak, Richard .

BIORESOURCES, 2018, 13 (01) :2005-2021

[14] Cutting with geometry Defined and Undefined Cutting Edges of Medium Density Fibreboards (MDF) [J].

Horstmann ;

Riegel ;

Scholz .

PROCEEDINGS OF THE 19TH INTERNATIONAL WOOD MACHINING SEMINAR, 2009, :122-131

[15] Effect of species and grinding disc distance on the surface roughness parameters of medium density fiberboard [J].

Gurau, Lidia ;

Ayrilmis, Nadir ;

Benthien, Jan Thore ;

Ohlmeyer, Martin ;

Kuzman, Manja Kitek ;

Racasan, Sergiu .

EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS, 2017, 75 (03) :335-346

[16] Investigation of mechanical properties of hybrid medium density fiberboards using coir and sawdust with UF resin [J].

Pugazhenthi, N. ;

Anand, P. .

POLYMER BULLETIN, 2023, 80 (01) :365-379

[17] Effect of Initial Moisture Content of Chips and Steaming Time on the Properties of Medium Density Fiberboard [J].

Takazawa, Ryosuke ;

Yamauchi, Hidefumi ;

Hayashi, Tomoyuki .

MOKUZAI GAKKAISHI, 2019, 65 (01) :13-18

[18] Determining thermal physical properties of pyrolyzing New Zealand medium density fibreboard (MDF) [J].

Li, K. Y. ;

Fleischmann, C. M. ;

Spearpoint, M. J. .

CHEMICAL ENGINEERING SCIENCE, 2013, 95 :211-220

[19] Some Chemical Properties of Luffa and Its Suitability for Medium Density Fiberboard (MDF) Production [J].

Akgul, Mehmet ;

Korkut, Suleyman ;

Camlibel, Osman ;

Ayata, Umit .

BIORESOURCES, 2013, 8 (02) :1709-1717

[20] Modeling and simulation of the hot-pressing process in the production of medium density fiberboard (MDF) [J].

Carvalho, LMH ;

Costa, CAV .

CHEMICAL ENGINEERING COMMUNICATIONS, 1998, 170 :1-21

← 1 2 3 4 5 →