HVOF sprayed Ni3Ti and Ni3Ti+(Cr3C2+20NiCr) coatings: Microstructure, microhardness and oxidation behaviour

被引：38

作者：

Reddy, Nagaraja C. ^{[1
]}

Kumar, B. S. Ajay ^{[1
]}

Reddappa, H. N. ^{[1
]}

Ramesh, M. R. ^{[2
]}

Koppad, Praveennath G. ^{[3
]}

Kord, S. ^{[4
,5
]}

机构：

[1] Bangalore Inst Technol, Dept Mech Engn, Bengaluru 560004, India

[2] Natl Inst Technol, Dept Mech Engn, Surathkal 575025, India

[3] Rapsri Engn Prod Co Ltd, Res & Dev, Harohalli 562112, India

[4] Pasteur Inst Iran, Dept Biomat, Tehran, Iran

[5] KN Toosi Univ Technol, Fac Mat Sci & Engn, Tehran, Iran

来源：

JOURNAL OF ALLOYS AND COMPOUNDS | 2018年 / 736卷

关键词：

High velocity oxy-fuel process; X-ray diffraction; Hardness; Oxidation; Electron microscopy; HIGH-TEMPERATURE OXIDATION; MECHANICAL-PROPERTIES; NICRALY COATINGS; CORROSION BEHAVIOR; CYCLIC OXIDATION; RESISTANCE; ALLOY; NI-20CR;

D O I：

10.1016/j.jallcom.2017.11.131

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

This paper reports the development of Ni3Ti and Ni3Ti+(Cr3C2+20NiCr) coatings on AISI 420 stainless steel (MDN-420) and titanium alloy ASTM B265 (Ti-15) by HVOF technique. Microstructure, microhardness and high temperature oxidation behaviour of coatings were investigated. Microstructure of coatings was dense and displayed layers depicting lamellar structure. The microhardness of coatings was significantly higher than that of substrate owing to higher density and cohesive strength between individual splats of coating materials. Cyclic oxidation studies conducted on Ni3Ti and Ni3Ti+(Cr3C2+20NiCr) coatings showed oxide scale was composed of various oxides like NiO, NiCr2O4 and Cr2O3 phases. The formation of compact and protective NiO phase in case of Ni3Ti coatings; NiO and Cr2O3 phases in Ni3Ti+(Cr3C2+20NiCr) coatings stabilised the weight gain exhibited slow oxidation rate at higher temperatures. (C) 2017 Elsevier B.V. All rights reserved.

引用

页码：236 / 245

页数：10

共 50 条

[1] Hot corrosion behaviour of HVOF sprayed Ni3Ti and Ni3Ti
Reddy, Nagaraja C.
Koppad, Praveennath G.
Reddappa, H. N.
Ramesh, M. R.
Rahn, E. R.
Varol, T.
SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES, 2019, 7 (02)
[2] High temperature oxidation and erosion-oxidation behaviour of HVOF sprayed Ni-20Cr, WC-20Cr-7Ni and Cr3C2-Ni-20Cr coatings
Kunioshi, CT
Correa, OV
Ramanathan, LV
SURFACE ENGINEERING, 2006, 22 (02) : 121 - 127
[3] Microstructure and wear properties of laser clad Ti2Ni3Si/Ni3Ti multiphase intermetallic coatings
Wang, HM
Tang, HB
Cai, LX
Cao, F
Zhang, LY
Yu, RL
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2005, 80 (08): : 1677 - 1682
[4] Microstructure and wear properties of laser clad Ti2Ni3Si/Ni3Ti multiphase intermetallic coatings
H.M. Wang
H.B. Tang
L.X. Cai
F. Cao
L.Y. Zhang
R.L. Yu
Applied Physics A, 2005, 80 : 1677 - 1682
[5] Microstructure and Adhesion Strength of Ni3Ti Coating Prepared by Mechanical Alloying and HVOF
Reddy, Nagaraja C.
Kumar, B. S. Ajay
Ramesh, M. R.
Koppad, Praveennath G.
PHYSICS OF METALS AND METALLOGRAPHY, 2018, 119 (05): : 462 - 468
[6] Microstructure and Adhesion Strength of Ni3Ti Coating Prepared by Mechanical Alloying and HVOF
Nagaraja C. Reddy
B. S. Ajay Kumar
M. R. Ramesh
Praveennath G. Koppad
Physics of Metals and Metallography, 2018, 119 : 462 - 468
[7] INVESTIGATION OF OXIDATION KINETICS FOR NI3TI COMPOUND
ARBUZOV, MP
CHUPRINA, VG
IZVESTIYA VYSSHIKH UCHEBNYKH ZAVEDENII FIZIKA, 1971, (12): : 92 - &
[8] High-temperature oxidation of HVOF thermally sprayed NiCr–Cr3C2 coatings: microstructure and kinetics
Y. Ding
T. Hussain
D. G. McCartney
Journal of Materials Science, 2015, 50 : 6808 - 6821
[9] High-temperature oxidation of HVOF thermally sprayed NiCr-Cr3C2 coatings: microstructure and kinetics
Ding, Y.
Hussain, T.
McCartney, D. G.
JOURNAL OF MATERIALS SCIENCE, 2015, 50 (20) : 6808 - 6821
[10] Hot corrosion studies of HVOF sprayed Cr3C2-NiCr and Ni-20Cr coatings on nickel-based superalloy at 900°C
Sidhu, T. S.
Prakash, S.
Agrawal, R. D.
SURFACE & COATINGS TECHNOLOGY, 2006, 201 (3-4): : 792 - 800

← 1 2 3 4 5 →