Ultrafast thin-disk multipass amplifier with 1.4 kW average power and 4.7 mJ pulse energy at 1030 nm converted to 820 W and 2.7 mJ at 515 nm

In recent years, there has been a growing interest in increasing the output power of ultrafast lasers to the kW-range. This allows higher productivity for laser material processing, e.g. for cutting of carbon-fiber reinforced plastics (CFRP) or for micro-machining. We developed an Yb:YAG thin-disk multipass amplifier delivering sub-8 ps pulses with 1.4 kW average power which is - to the best of our knowledge - the highest output power reported for a sub-100 ps ultrafast laser system so far. The amplifier is seeded by a regenerative amplifier with 6.5 ps pulses and 115 W of average power at a repetition rate of 300 kHz. Taking this repetition rate into account, the energy of the amplified pulses is as high as 4.7 mJ. This was achieved using a scheme with 40 mirrors in an array to geometrically fold the seed beam 40 times over the thin-disk. The beam quality was measured to be better than M-2 = 1.4. This system was used in first experiments to cut CFRP with very good quality and with unprecedented efficiency. Additionally, the output beam of the amplifier was frequency-doubled in an LBO crystal to 820 W (70 % conversion efficiency) output power at the second harmonic wavelength (515 nm) and 106 W (26.5 % conversion efficiency) at the third harmonic wavelength (343 nm). Both results are record output powers for ultrafast laser systems at the respective wavelengths. In the presentation, we will show concepts on further power scaling of the system.