Microstructural Evolution of AISI D2 Tool Steel During Aging

被引：1
作者：
Farina, Paula F. S. [1 ]
Farina, Alexandre B. [1 ,4 ]
Capo, Julio [2 ]
Padovese, Linilson R. [3 ]
Barbosa, Celso A. [4 ]
Goldenstein, Helio [1 ]
机构：
[1] Univ Sao Paulo, Escola Politecn, BR-05508 Sao Paulo, Brazil
[2] Univ Oriente, Fac Ciencias Naturales, Santiago De Cuba, Cuba
[3] Univ Sao Paulo, Escola Politecn, Mech Dept, Sao Paulo, Brazil
[4] Villares Met SA, Jardim Santa Carolina, Brazil
来源：
SOLID-SOLID PHASE TRANSFORMATIONS IN INORGANIC MATERIALS, PTS 1-2 | 2011年 / 172-174卷
关键词：
tool steel; aging; Barkhausen Noise; WEAR-RESISTANCE;
D O I：
10.4028/www.scientific.net/SSP.172-174.511
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effects of low temperature isothermal treatments on a quenched AISI D2 tool steel was studied using Barkhausen Noise, X-ray diffraction, dilatometry and optical and electronic microscopy. The specimens were austenitized at 1040 degrees C and quenched in oil. The isothermal treatments involved immersion in hot oil baths at 80 degrees or 130 degrees C for 0.1, 0.6, 1, 3, 10 and 30 hours, except for the dilatometry, in which the specimens were submitted to a single thermal cycle for 30 hours. These thermal treatments are industrially known as "stress relief treatments", and are used to prevent cracks and catastrophic failures during cryogenic treatments. The comparison of global and local (microscopy) measurements allows the discussion of the phenomena involved in the aging process.
引用
收藏
页码：511 / +
页数：2
相关论文
共 50 条
  • [31] Measurement and Analysis of Magnetic Properties in IS 2062 Steel and AISI D2 Tool Steel Via Non-destructive Testing
    Diwakar, V
    Sharma, A.
    Yusufzai, M. Z. K.
    Vashista, M.
    MAPAN-JOURNAL OF METROLOGY SOCIETY OF INDIA, 2023, 38 (02): : 489 - 498
  • [32] Measurement and Analysis of Magnetic Properties in IS 2062 Steel and AISI D2 Tool Steel Via Non-destructive Testing
    Vikas Diwakar
    Ashwani Sharma
    Mohd Zaheer Khan Yusufzai
    Meghanshu Vashista
    MAPAN, 2023, 38 : 489 - 498
  • [33] Microstructural Evolution of the TLP Joints of RAFM Steel during Aging and Creep
    Liu, Kun
    Li, Wenchao
    Ding, Ran
    Liu, Chenxi
    METALS, 2022, 12 (08)
  • [34] Micro-magnetic characterisation of ground AISI D2 tool steel using hysteresis loop technique
    Awale, Akash
    Shrivastava, Atul Kumar
    Chaudhari, Abhimanyu
    Vashista, Meghanshu
    Yusufzai, Mohd Zaheer Khan
    INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2021, 62 (1-3) : 180 - 198
  • [35] Assessment of Retained Austenite in AISI D2 Tool Steel Using Magnetic Hysteresis and Barkhausen Noise Parameters
    Saeed Kahrobaee
    Mehrdad Kashefi
    Journal of Materials Engineering and Performance, 2015, 24 : 1192 - 1198
  • [36] Influence of varied cryotreatment on the wear behavior of AISI D2 steel
    Dasa, D.
    Dutta, A. K.
    Ray, K. K.
    WEAR, 2009, 266 (1-2) : 297 - 309
  • [37] Nitriding of Steel AISI D2 After Deep Cryogenic Treatment
    Ramos, F. D.
    Moscoso, M. F. C.
    Regul, A.
    Diehl, I. L.
    Diehl, C. A. T. S.
    METAL SCIENCE AND HEAT TREATMENT, 2023, 65 (5-6) : 285 - 291
  • [38] Assessment of Retained Austenite in AISI D2 Tool Steel Using Magnetic Hysteresis and Barkhausen Noise Parameters
    Kahrobaee, Saeed
    Kashefi, Mehrdad
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2015, 24 (03) : 1192 - 1198
  • [39] Microstructure and mechanical behavior of pulsed laser surface melted AISI D2 cold work tool steel
    Yasavol, N.
    Abdollah-zadeh, A.
    Ganjali, M.
    Alidokht, S. A.
    APPLIED SURFACE SCIENCE, 2013, 265 : 653 - 662
  • [40] Nitriding of Steel AISI D2 After Deep Cryogenic Treatment
    F. D. Ramos
    M. F. C. Moscoso
    A. Regul
    I. L. Diehl
    C. A. T. S. Diehl
    Metal Science and Heat Treatment, 2023, 65 : 285 - 291
12345