Microstructural evolution of laser solid forming Inconel 718 superalloy under different laser power

被引：10
作者：
Zhu, L. [1 ]
Xu, Z. F. [1 ]
Gu, Y. F. [1 ]
机构：
[1] Zhejiang Univ, Sch Mat Sci & Engn, Hangzhou 310027, Zhejiang, Peoples R China
来源：
MATERIALS LETTERS | 2018年 / 217卷
关键词：
Nickel based superalloy; Laser solid forming; Microstructure; Solution treatment; Recrystallization; MECHANICAL-PROPERTIES; RESIDUAL-STRESS; STRAIN FIELDS; RECRYSTALLIZATION; COMPONENTS;
D O I：
10.1016/j.matlet.2018.01.099
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The present work studies the influence of laser power on the microstructure of as-deposited and solution treated Inconel 718 (IN718) superalloy by laser solid forming (LSF) method. The morphologies of Laves phase are discrepant under different laser power. The formation of Nb and Mo rich Laves phase is found in the as-deposited IN718 superalloy. The grains vary with increasing laser power from 850 W to 1100 W. Fine and relative uniform grains of IN718 superalloy are obtained under laser power 1000 W after solution treated at 1100 degrees C for 1 h. When the laser power is 1000 W, the obtained IN718 superalloy has the highest residual stress in the overlap area. (C) 2018 Elsevier B.V. All rights reserved.
引用
收藏
页码：159 / 162
页数：4
相关论文
共 50 条
[41]   Influence of Selective Laser Melting Additive Manufacturing Parameters in Inconel 718 Superalloy [J].
Kladovasilakis, Nikolaos ;
Charalampous, Paschalis ;
Tsongas, Konstantinos ;
Kostavelis, Ioannis ;
Tzovaras, Dimitrios ;
Tzetzis, Dimitrios .
MATERIALS, 2022, 15 (04)
[42]   Influence of pulsed laser scanning patterns on microstructural evolution and mechanical properties of Inconel 718 in direct laser deposition [J].
Ma, Liang ;
Kong, Xiangwei ;
Liang, Jingjing ;
Li, Jinguo ;
Feng, He ;
Ci, Shiwei ;
Zhang, Xue ;
Sun, Cong ;
Jin, Zhibo .
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 25 :1231-1244
[43]   Microstructure and mechanical properties of the Inconel 718 superalloy manufactured by selective laser melting [J].
Mukhtarova, K. Sh ;
Shakhov, R., V ;
Mukhtarov, Sh Kh ;
Smirnov, V. V. ;
Imayev, V. M. .
LETTERS ON MATERIALS, 2019, 9 (04) :480-484
[44]   Study on Grindability of Inconel 718 Superalloy Fabricated by Selective Laser Melting (SLM) [J].
Tian, Chenchen ;
Li, Xuekun ;
Liu, Zhonglei ;
Zhi, Geng ;
Guo, Guoqiang ;
Wang, Liping ;
Rong, Yiming .
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2018, 64 (05) :319-328
[45]   Effect of Heat Treatment on Microstructure of TiB2/Inconel718 Composites Fabricated by Laser Solid Forming [J].
Zhai, Huajing ;
Liu, Fenggang ;
Liu, Fencheng ;
You, Qifan ;
Yu, Xiaobin ;
Gao, Xuehao .
CHINESE JOURNAL OF LASERS-ZHONGGUO JIGUANG, 2025, 52 (12)
[46]   In-situ laser ultrasonic grain size measurement in superalloy INCONEL 718 [J].
Garcin, Thomas ;
Schmitt, Jean Hubert ;
Militzer, Matthias .
JOURNAL OF ALLOYS AND COMPOUNDS, 2016, 670 :329-336
[47]   Studies on the Microstructural Evolution and Mechanical Properties of Superalloy Inconel 718 Induced by Low Plasticity Burnishing Coupled with Turning [J].
Hua, Yang ;
Liu, Zhanqiang ;
Yi, Jie ;
Tang, Aijun .
MATERIALS, 2022, 15 (11)
[48]   Effect of Intermediate Heat Treatment Temperature on Microstructure and Notch Sensitivity of Laser Solid Firmed Inconel 718 Superalloy [J].
Liu Fencheng ;
Lin Xin ;
Song Menghua ;
Zhao Weiwei ;
Chen Jing ;
Huang Weidong .
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2011, 26 (05) :908-913
[49]   Study on microstructure and mechanical properties of laser rapid forming Inconel 718 [J].
Zhao, Xiaoming ;
Chen, Jing ;
Lin, Xin ;
Huang, Weidong .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 478 (1-2) :119-124
[50]   Control of microstructure and mechanical properties of laser solid formed Inconel 718 superalloy by electromagnetic stirring [J].
Liu, Fencheng ;
Cheng, Hongmao ;
Yu, Xiaobin ;
Yang, Guang ;
Huang, Chunping ;
Lin, Xin ;
Chen, Jing .
OPTICS AND LASER TECHNOLOGY, 2018, 99 :342-350
12345