Microstructural evolution of laser solid forming Inconel 718 superalloy under different laser power

被引：10

作者：

Zhu, L. ^{[1
]}

Xu, Z. F. ^{[1
]}

Gu, Y. F. ^{[1
]}

机构：

[1] Zhejiang Univ, Sch Mat Sci & Engn, Hangzhou 310027, Zhejiang, Peoples R China

来源：

MATERIALS LETTERS | 2018年 / 217卷

关键词：

Nickel based superalloy; Laser solid forming; Microstructure; Solution treatment; Recrystallization; MECHANICAL-PROPERTIES; RESIDUAL-STRESS; STRAIN FIELDS; RECRYSTALLIZATION; COMPONENTS;

D O I：

10.1016/j.matlet.2018.01.099

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The present work studies the influence of laser power on the microstructure of as-deposited and solution treated Inconel 718 (IN718) superalloy by laser solid forming (LSF) method. The morphologies of Laves phase are discrepant under different laser power. The formation of Nb and Mo rich Laves phase is found in the as-deposited IN718 superalloy. The grains vary with increasing laser power from 850 W to 1100 W. Fine and relative uniform grains of IN718 superalloy are obtained under laser power 1000 W after solution treated at 1100 degrees C for 1 h. When the laser power is 1000 W, the obtained IN718 superalloy has the highest residual stress in the overlap area. (C) 2018 Elsevier B.V. All rights reserved.

引用

页码：159 / 162

页数：4

共 50 条

[31] Laser beam powder bed fusion of Inconel 718 under high power and scanning speed [J].

Ikeshoji, Toshi-Taka ;

Tachibana, Yusuke ;

Yonehara, Makiko ;

Kyogoku, Hideki .

JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, 2023, 17 (06)

[32] Microstructural change during laser welding of Inconel 718 [J].

Sharma, Sumit K. ;

Biswas, K. ;

Nath, A. K. ;

Manna, I. ;

Majumdar, J. Dutta .

OPTIK, 2020, 218

[33] Texture and Microstructural Features at Different Length Scales in Inconel 718 Produced by Selective Laser Melting [J].

Calandri, Michele ;

Yin, Shuo ;

Aldwell, Barry ;

Calignano, Flaviana ;

Lupoi, Rocco ;

Ugues, Daniele .

MATERIALS, 2019, 12 (08)

[34] Microstructural and tensile characterization of Inconel 718 laser coatings for aeronautic components [J].

Lambarri, Jon ;

Leunda, Josu ;

Garcia Navas, Virginia ;

Soriano, Carlos ;

Sanz, Carmen .

OPTICS AND LASERS IN ENGINEERING, 2013, 51 (07) :813-821

[35] Single pass laser joining of Inconel 718 superalloy with filler [J].

Krenz, D. ;

Egbewande, A. T. ;

Zhang, H. -R. ;

Ojo, O. A. .

MATERIALS SCIENCE AND TECHNOLOGY, 2011, 27 (01) :268-274

[36] Research Progress of Laser Additively Manufactured Inconel 718 Superalloy [J].

Yang H. ;

Li Y. ;

Hao J. .

Cailiao Daobao/Materials Reports, 2022, 36 (06)

[37] Achievement of grain boundary engineering by transforming residual stress in selective laser-melted Inconel 718 superalloy [J].

Liu, Bo ;

Ding, Yutian ;

Xu, Jiayu ;

Wang, Xingmao ;

Gao, Yubi ;

Hu, Yong ;

Chen, Dalin .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2023, 866

[38] Improved plasticity of Inconel 718 superalloy fabricated by selective laser melting through a novel heat treatment process [J].

Li, X. ;

Shi, J. J. ;

Cao, G. H. ;

Russell, A. M. ;

Zhou, Z. J. ;

Li, C. P. ;

Chen, G. F. .

MATERIALS & DESIGN, 2019, 180

[39] Building height-related creep properties of Inconel 718 superalloy fabricated by laser powder bed fusion [J].

Wang, Y. C. ;

Wang, L. Y. ;

Zhang, B. ;

Song, Z. M. ;

Luo, X. M. ;

Zhang, G. P. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 854

[40] Effect on microstructural and mechanical properties of Inconel 718 superalloy fabricated by selective laser melting with rescanning by low energy density [J].

Park, Jung Hyun ;

Bang, Gyung Bae ;

Lee, Kee-Ahn ;

Son, Yong ;

Kim, Won Rae ;

Kim, Hyung Giun .

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2021, 10 :785-796

← 1 2 3 4 5 →