Analysis of creep deformation process of heat resistant steels using positron annihilation lifetime

被引：3
作者：
Igarashi, Masaaki [1 ]
Moriguchi, Koji [1 ]
Muneki, Seiichi [2 ]
Abe, Fujio [2 ]
Shirai, Yasuharu [3 ]
机构：
[1] Sumitomo Met Ind Ltd, Corp Res & Dev Labs, 1-8 Fuso Cho, Amagasaki, Hyogo 6600891, Japan
[2] Natl Inst Mat Sci, Struct Met Ctr, Tsukuba, Ibaraki 3050047, Japan
[3] Osaka Univ, Dept Mat Sci & Engn, Suita, Osaka 5650871, Japan
来源：
PRICM 6: SIXTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-3 | 2007年 / 561-565卷
关键词：
creep; positron annihilation; life prediction; ferrite; austenite; martensite; MX; M23C6;
D O I：
10.4028/www.scientific.net/MSF.561-565.2233
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Creep deformation mechanism of the steels with a different matrix, alpha (ferrite), alpha' (martensite) and gamma (austenite), and precipitates such as MX and M23C6 has been analyzed using positron annihilation lifetime measurement. The positron annihilation lifetime has been found to be a very useful tool for evaluating the characteristic creep damage of the steels with different microstructure and the corresponding microstructural evolution during creep deformation. The creep deformation process of the alpha steel is heterogeneous, while the alpha'+M23C6 steel exhibits gradual changes in the creep rate in both transient and acceleration creep regions with the largest off-set strain, implying the homogeneous creep deformation. The alpha'+M23C6+MX steel is in between the alpha and alpha'+M23C6 steels. The homogeneous creep deformation takes place in the 7 steel.
引用
收藏
页码：2233 / +
页数：2
相关论文
共 50 条
  • [31] Creep Lifetime Reduction in Heat Affected Zone in Boron-Added 9Cr Heat Resistant Steel
    Matsunaga, Tetsuya
    Hongo, Hiromichi
    Tabuchi, Masaaki
    Yamabe-Mitarai, Yoko
    ISIJ INTERNATIONAL, 2020, 60 (06) : 1342 - 1348
  • [32] An Approach to Assessment of the Lifetime Characteristics of Steels under Creep Conditions Using Fracture Mechanics Criteria
    Lanin A.A.
    Grin’ E.A.
    Thermal Engineering, 2018, 65 (4) : 239 - 245
  • [33] Positron and positronium annihilation lifetime studies of pores and free volumes in silica xerogels prepared by sol-gel process
    Wakabayashi, Y
    Li, HL
    Ujihira, Y
    Kamitani, K
    Inoue, H
    Makishima, A
    POSITRON ANNIHILATION: ICPA-11 - PROCEEDINGS OF THE 11TH INTERNATIONAL CONFERENCE ON POSITRON ANNIHILATION, KANSAS CITY, MISSOURI, USA, MAY 1997, 1997, 255-2 : 357 - 359
  • [34] Optimization of Cr content in high Cr heat resistant steels on the basis of long term creep strength
    Hashizume, R
    Miki, K
    Azuma, T
    Ishiguro, T
    Murata, Y
    Morinaga, M
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2002, 88 (11): : 793 - 800
  • [35] The role of Laves phase on microstructure evolution and creep strength of novel 9%Cr heat resistant steels
    Prat, O.
    Garcia, J.
    Rojas, D.
    Sauthoff, G.
    Inden, G.
    INTERMETALLICS, 2013, 32 : 362 - 372
  • [36] Changes in anodic polarization behavior of 12%Cr ferritic heat-resistant steels due to creep
    Abe Y.
    Komazaki S.-I.
    Mitsueda T.
    Zairyo/Journal of the Society of Materials Science, Japan, 2011, 60 (02) : 124 - 130
  • [37] 9%Cr heat resistant steels: Alloy design, microstructure evolution and creep response at 650°C
    Rojas, D.
    Garcia, J.
    Prat, O.
    Sauthoff, G.
    Kaysser-Pyzalla, A. R.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (15): : 5164 - 5176
  • [38] Long-term creep behaviours and structural stabilities of austenitic heat-resistant stainless steels
    Ohlin, O.
    Siriki, R.
    Chai, G.
    MATERIALS AT HIGH TEMPERATURES, 2024, 41 (01) : 61 - 72
  • [39] Creep Properties of Weld Repaired Low Alloy Heat Resistant CrMo and Mo Steels at 540°C
    Wu, Rui
    Storesund, Jan
    Borggreen, Kjeld
    CREEP & FRACTURE IN HIGH TEMPERATURE COMPONENTS: DESIGN & LIFE ASSESSMENT ISSUES, PROCEEDINGS, 2009, : 612 - +
  • [40] Accumulation of Defects in Austenitic Stainless Steels with Phosphorus and Titanium Additions upon Electron Irradiation at 573 K Investigated Using Positron Annihilation Spectroscopy
    Perminov, D. A.
    Druzhkov, A. P.
    Pecherkina, N. L.
    Arbuzov, V. L.
    PHYSICS OF METALS AND METALLOGRAPHY, 2019, 120 (03) : 284 - 289
12345