Analysis of creep deformation process of heat resistant steels using positron annihilation lifetime

被引：3

作者：

Igarashi, Masaaki ^{[1
]}

Moriguchi, Koji ^{[1
]}

Muneki, Seiichi ^{[2
]}

Abe, Fujio ^{[2
]}

Shirai, Yasuharu ^{[3
]}

机构：

[1] Sumitomo Met Ind Ltd, Corp Res & Dev Labs, 1-8 Fuso Cho, Amagasaki, Hyogo 6600891, Japan

[2] Natl Inst Mat Sci, Struct Met Ctr, Tsukuba, Ibaraki 3050047, Japan

[3] Osaka Univ, Dept Mat Sci & Engn, Suita, Osaka 5650871, Japan

来源：

PRICM 6: SIXTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-3 | 2007年 / 561-565卷

关键词：

creep; positron annihilation; life prediction; ferrite; austenite; martensite; MX; M23C6;

D O I：

10.4028/www.scientific.net/MSF.561-565.2233

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Creep deformation mechanism of the steels with a different matrix, alpha (ferrite), alpha' (martensite) and gamma (austenite), and precipitates such as MX and M23C6 has been analyzed using positron annihilation lifetime measurement. The positron annihilation lifetime has been found to be a very useful tool for evaluating the characteristic creep damage of the steels with different microstructure and the corresponding microstructural evolution during creep deformation. The creep deformation process of the alpha steel is heterogeneous, while the alpha'+M23C6 steel exhibits gradual changes in the creep rate in both transient and acceleration creep regions with the largest off-set strain, implying the homogeneous creep deformation. The alpha'+M23C6+MX steel is in between the alpha and alpha'+M23C6 steels. The homogeneous creep deformation takes place in the 7 steel.

引用

页码：2233 / +

页数：2

共 50 条

[21] Behavior of boron in 9Cr heat resistant steel during heat treatment and creep deformation
Abe, Fujio
Mechanical Behavior of Materials X, Pts 1and 2, 2007, 345-346 : 569 - 572
[22] Low-Stress Creep Deformation in Long-Term Aged Ferritic Heat-Resistant Steel
Yamasaki, Shigeto
Mitsuhara, Masatoshi
Ikeda, Ken-ichi
Hata, Satoshi
Nakashima, Hideharu
MATERIALS TRANSACTIONS, 2014, 55 (05) : 842 - 849
[23] Machine-learning investigation on the creep-rupture time of heat-resistant steels
Nakamura, Kaoru
Ohnuma, Toshiharu
MATERIALS TODAY COMMUNICATIONS, 2023, 36
[24] A study of annealing stages in commercial pure Cu using mechanical measurements and positron annihilation lifetime technique
Bishay, I. K.
Aly, E. Hassan
Saadallah, F. A.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (16-17): : 3893 - 3897
[25] Creep Property of Boron Added 9Cr Heat Resistant Steels after Welding
Matsunaga, Tetsuya
Souissi, Maaouia
Sahara, Ryoji
Hongo, Hiromichi
Tabuchi, Masaaki
Zhang, Wei
Mills, Michael J.
THERMEC 2018: 10TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS, 2018, 941 : 340 - 345
[26] FUNDAMENTAL PROPERTIES OF LONG-TERM CREEP STRENGTH FOR FERRITIC HEAT-RESISTANT STEELS
KIMURA, K
KUSHIMA, H
YAGI, K
TANAKA, C
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1991, 77 (05): : 667 - 674
[27] Prediction of High Temperature Creep Deformation and Rupture Life on HP Heat Resistant Alloy Using Z(c) Parameter
Li Hui-fang
Zhao Jie
Cheng Cong-qian
Min Xiao-hua
Cao Tie-shan
Xu Jun
CAILIAO GONGCHENG-JOURNAL OF MATERIALS ENGINEERING, 2018, 46 (03): : 112 - 116
[28] A study of some properties for Li-Mn nanoparticles ferrite using positron annihilation lifetime technique
Aly, E. Hassan
Samy, A. M.
JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 647 : 427 - 430
[29] Creep Lifetime Reduction in Heat Affected Zone in Boron-Added 9Cr Heat Resistant Steel
Matsunaga, Tetsuya
Hongo, Hiromichi
Tabuchi, Masaaki
Yamabe-Mitarai, Yoko
ISIJ INTERNATIONAL, 2020, 60 (06) : 1342 - 1348
[30] Methodological aspects of creep prediction for heat-resistant steels and alloys. Part 1. Analysis of the equations of state
Krivenyuk V.V.
Strength of Materials, 2007, 39 (01) : 37 - 45

← 1 2 3 4 5 →