Tangential strain-based criteria for mixed-mode I/II fracture toughness of cement concrete

被引:64
作者
Mirsayar, M. M. [1 ]
Razmi, A. [2 ]
Berto, F. [3 ]
机构
[1] Texas A&M Univ, Zachry Dept Civil Engn, College Stn, TX 77843 USA
[2] Islamic Azad Univ Ahar, Dept Civil Engn, Ahar, Iran
[3] NTNU, Dept Engn Design & Mat, Trondheim, Norway
关键词
cement concrete; fracture criteria; maximum tangential strain; semicircular bend (SCB) specimen; FIBER-REINFORCED CONCRETE; ANGLED CRACK PROBLEM; BRITTLE-FRACTURE; T-STRESS; CRITICAL DISTANCES; INTERFACE CRACKS; SPECIMENS; STRENGTH; FAILURE; ENERGY;
D O I
10.1111/ffe.12665
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Experimental and theoretical works are performed on the mixed-mode I/II brittle fracture of cement concrete tested by edge cracked semicircular bend specimens. Theoretical background of the traditional fracture criteria including strain energy density, maximum tangential stress, and maximum tangential strain (MTSN) are introduced. The ability of each fracture criterion in prediction of the fracture test data is investigated. The comparison between the evaluations by the traditional criteria and the experimental data shows that none of them are capable of successfully estimating the fracture resistance of cement concrete. An enhanced version of the MTSN criterion is then employed to predict the test data. It is demonstrated that the extended MTSN criterion can successfully predict the test data in a higher accuracy than traditional criteria.
引用
收藏
页码:129 / 137
页数:9
相关论文
共 50 条
  • [41] A three-field phase-field model for mixed-mode fracture in rock based on experimental determination of the mode II fracture toughness
    Hug, L.
    Potten, M.
    Stockinger, G.
    Thuro, K.
    Kollmannsberger, S.
    ENGINEERING WITH COMPUTERS, 2022, 38 (06) : 5563 - 5581
  • [42] Application of quantifier elimination to mixed-mode fracture criteria in crack problems
    Ioakimidis, Nikolaos I.
    ARCHIVE OF APPLIED MECHANICS, 2017, 87 (10) : 1567 - 1604
  • [43] A three-field phase-field model for mixed-mode fracture in rock based on experimental determination of the mode II fracture toughness
    L. Hug
    M. Potten
    G. Stockinger
    K. Thuro
    S. Kollmannsberger
    Engineering with Computers, 2022, 38 : 5563 - 5581
  • [44] Mixed-mode I-II mesoscale fracture behavior of concrete determined by the realistic aggregate numerical model
    Yu Jiangjiang
    Li Guodong
    Ren Zhengyi
    Zhang Wei
    Tang Jiangqi
    Zhang Li
    Si Xiaolong
    Zhao Zhimeng
    CONSTRUCTION AND BUILDING MATERIALS, 2019, 226 : 802 - 817
  • [45] Mode I and mode II fracture toughness and fracture energy of cement concrete containing different percentages of coarse and fine recycled tire rubber granules
    Karimi, Hamid Reza
    Aliha, M. R. M.
    Ebneabbasi, Pouyan
    Salehi, S. M.
    Khedri, Ehsan
    Haghighatpour, Pegah Jafari
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2023, 123
  • [46] Fracture characteristics of mixed-mode toughness of dissimilar adherends (cohesive and interfacial fracture)
    Abadi, Ramak Hossein
    Torun, Ahmet Refah
    Fard, Arash Mohammadali Zadeh
    Choupani, Naghdali
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2020, 34 (06) : 599 - 615
  • [47] Mixed mode fracture analysis of CCBD specimens based on the extended maximum tangential strain criterion
    Hua, W.
    Dong, S.
    Pan, X.
    Wang, Q.
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2017, 40 (12) : 2118 - 2127
  • [48] Fatigue/fracture characterization of composite bonded joints under mode I, mode II and mixed-mode I plus II
    de Moura, M. F. S. F.
    Goncalves, J. P. M.
    Fernandez, M. V.
    COMPOSITE STRUCTURES, 2016, 139 : 62 - 67
  • [49] Mixed-mode (I/II) interlaminar fracture of glued-laminated timber
    Zhao, Yanhua
    Li, Zheng
    Xu, Bohan
    MATERIALS & DESIGN, 2017, 131 : 210 - 218
  • [50] Fracture prediction of rocks under mode I and mode II loading using the generalized maximum tangential strain criterion
    Wei, Ming-Dong
    Dai, Feng
    Xu, Nu-Wen
    Liu, Yi
    Zhao, Tao
    ENGINEERING FRACTURE MECHANICS, 2017, 186 : 21 - 38