Tangential strain-based criteria for mixed-mode I/II fracture toughness of cement concrete

被引:64
作者
Mirsayar, M. M. [1 ]
Razmi, A. [2 ]
Berto, F. [3 ]
机构
[1] Texas A&M Univ, Zachry Dept Civil Engn, College Stn, TX 77843 USA
[2] Islamic Azad Univ Ahar, Dept Civil Engn, Ahar, Iran
[3] NTNU, Dept Engn Design & Mat, Trondheim, Norway
关键词
cement concrete; fracture criteria; maximum tangential strain; semicircular bend (SCB) specimen; FIBER-REINFORCED CONCRETE; ANGLED CRACK PROBLEM; BRITTLE-FRACTURE; T-STRESS; CRITICAL DISTANCES; INTERFACE CRACKS; SPECIMENS; STRENGTH; FAILURE; ENERGY;
D O I
10.1111/ffe.12665
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Experimental and theoretical works are performed on the mixed-mode I/II brittle fracture of cement concrete tested by edge cracked semicircular bend specimens. Theoretical background of the traditional fracture criteria including strain energy density, maximum tangential stress, and maximum tangential strain (MTSN) are introduced. The ability of each fracture criterion in prediction of the fracture test data is investigated. The comparison between the evaluations by the traditional criteria and the experimental data shows that none of them are capable of successfully estimating the fracture resistance of cement concrete. An enhanced version of the MTSN criterion is then employed to predict the test data. It is demonstrated that the extended MTSN criterion can successfully predict the test data in a higher accuracy than traditional criteria.
引用
收藏
页码:129 / 137
页数:9
相关论文
共 50 条
  • [21] Effects of biocompatible Nanofillers on mixed-mode I and II fracture toughness of PMMA base dentures
    Mousavi, A.
    Aliha, M. R. M.
    Imani, D. M.
    JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2020, 103
  • [22] Influence of chlorides on the fracture toughness and fracture resistance under the mixed mode I/II of high-performance concrete
    Miarka, Petr
    Seitl, Stanislav
    Hornakova, Marie
    Lehner, Petr
    Konecny, Petr
    Sucharda, Oldrich
    Bilek, Vlastimil
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2020, 110
  • [23] Mixed-mode I/II wood fracture characterization using the mixed-mode bending test
    de Moura, M. F. S. F.
    Oliveira, J. M. Q.
    Morais, J. J. L.
    Xavier, J.
    ENGINEERING FRACTURE MECHANICS, 2010, 77 (01) : 144 - 152
  • [24] Influence of Bedding Planes on Mode I and Mixed-Mode (I-II) Dynamic Fracture Toughness of Coal: Analysis of Experiments
    Wang, Wei
    Zhao, Yixin
    Teng, Teng
    Zhang, Cun
    Jiao, Zhenhua
    ROCK MECHANICS AND ROCK ENGINEERING, 2021, 54 (01) : 173 - 189
  • [25] Effect of Glass and Polypropylene Hybrid Fibers on Mode I, Mode II, and Mixed-Mode Fracture Toughness of Concrete Containing Micro-Silica and Limestone Powder
    Fakhri, Danial
    Hosseini, Mehdi
    Mandikhani, Mandi
    JOURNAL OF MINING AND ENVIRONMENT, 2022, 13 (02): : 559 - 577
  • [26] Fracture toughness of mixed-mode anticracks in highly porous materials
    Adam, Valentin
    Bergfeld, Bastian
    Weissgraeber, Philipp
    van Herwijnen, Alec
    Rosendahl, Philipp L.
    NATURE COMMUNICATIONS, 2024, 15 (01)
  • [27] Pure and mixed-mode (I/III) fracture toughness of preplaced aggregate fibrous concrete and slurry infiltrated fibre concrete and hybrid combination comprising nano carbon tubes
    Murali, Gunasekaran
    Abid, Sallal R.
    Al-Lami, Karrar
    Vatin, Nikolai Ivanovich
    Dixit, Saurav
    Fediuk, Roman
    CONSTRUCTION AND BUILDING MATERIALS, 2023, 362
  • [28] Strain rate effect on mixed mode I/II fracture toughness of sandstone and its micromechanism
    Cao, Peiwang
    Zhou, Tao
    Zhu, Jianbo
    INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES, 2023, 165
  • [29] Comparing Energy-Based Criterion with Strain-Based Criterion forPredicting Brittle Fracture in V-Shaped Notches under Mixed-Mode I/II Loading Conditions
    Sajjadi, S. H.
    Khorshidvand, A. R.
    Jabbari, M.
    Javadi, M.
    PHYSICAL MESOMECHANICS, 2021, 24 (03) : 291 - 302
  • [30] Mixed-mode (I plus II) fracture characterization of wood bonded joints
    de Moura, M. F. S. F.
    Oliveira, J. M. Q.
    Morais, J. J. L.
    Dourado, N.
    CONSTRUCTION AND BUILDING MATERIALS, 2011, 25 (04) : 1956 - 1962