Development of spinel opaque glazes for ceramic tiles
被引:18
作者:
Cai, Jingpei
论文数: 0引用数: 0
h-index: 0
机构:
South China Univ Technol, Sch Mat Sci & Engn, Guangzhou 510640, Guangdong, Peoples R ChinaSouth China Univ Technol, Sch Mat Sci & Engn, Guangzhou 510640, Guangdong, Peoples R China
Cai, Jingpei
[1
]
Lv, Ming
论文数: 0引用数: 0
h-index: 0
机构:
South China Univ Technol, Sch Mat Sci & Engn, Guangzhou 510640, Guangdong, Peoples R ChinaSouth China Univ Technol, Sch Mat Sci & Engn, Guangzhou 510640, Guangdong, Peoples R China
Lv, Ming
[1
]
论文数: 引用数:
h-index:
机构:
Guan, Kang
[1
]
论文数: 引用数:
h-index:
机构:
Sun, Qian
[1
]
Peng, Cheng
论文数: 0引用数: 0
h-index: 0
机构:
South China Univ Technol, Sch Mat Sci & Engn, Guangzhou 510640, Guangdong, Peoples R ChinaSouth China Univ Technol, Sch Mat Sci & Engn, Guangzhou 510640, Guangdong, Peoples R China
Peng, Cheng
[1
]
Wu, Jianqing
论文数: 0引用数: 0
h-index: 0
机构:
South China Univ Technol, Sch Mat Sci & Engn, Guangzhou 510640, Guangdong, Peoples R ChinaSouth China Univ Technol, Sch Mat Sci & Engn, Guangzhou 510640, Guangdong, Peoples R China
Wu, Jianqing
[1
]
Liu, Yong
论文数: 0引用数: 0
h-index: 0
机构:
South China Agr Univ, Sch Phys, Guangzhou 510640, Guangdong, Peoples R ChinaSouth China Univ Technol, Sch Mat Sci & Engn, Guangzhou 510640, Guangdong, Peoples R China
Liu, Yong
[2
]
机构:
[1] South China Univ Technol, Sch Mat Sci & Engn, Guangzhou 510640, Guangdong, Peoples R China
[2] South China Agr Univ, Sch Phys, Guangzhou 510640, Guangdong, Peoples R China
The feasibility of developing fast-firing opaque wall tile glazes obtained from zircon-free frits was studied. The structural and morphological characteristics of the glazes were determined by differential scanning calorimetry, an optical dilatometer, X-ray diffraction and scanning electron microscopy. The studied glaze was characterized by a high whiteness value L* greater than 94, very low values of a* and b* which is about -0.65 and 0.01, respectively, and a high gloss value above 98%. The opaque effect is due to the presence of spine! crystals with a size range of 0.2-1.0 mu m, which is formed by devitrification during fast-firing. The Vickers micro-hardness of the studied glaze is higher than the one of the commercial zircon based glass-ceramic glazes. This type of frit can be an alternative one for fabricating opaque ceramic glazes.