Tensile Properties of a Friction Stir Processed Al-Cu 2218 Alloy at Elevated Temperatures and Related Microstructural Characteristics

被引：0

作者：

Chen, Ssu-Ta ^{[1
]}

Lui, Truan-Sheng ^{[1
]}

Chen, Li-Hui ^{[1
]}

机构：

[1] Natl Cheng Kung Univ, Dept Mat Sci & Engn, Tainan 70101, Taiwan

来源：

TMS 2010 139TH ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 1: MATERIALS PROCESSING AND PROPERTIES | 2010年

关键词：

friction stir process; tensile elongation; grain boundary sliding; GRAIN-SIZE; SUPERPLASTICITY; ALUMINUM; PRECIPITATION; FORMABILITY; STABILITY; WELDS;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Tensile tests of as extruded (F) and as friction stir processed (FFSP) Al-Cu 2218 alloy are conducted at elevated temperatures from room temperature to 450 degrees C, respectively. From room temperature to 300 degrees C, F samples perform a higher tensile flow stress than FFSP samples, and this is resulted from an effect of natural aging. On the other hand, the stable FFSP microstructures promote grain boundary sliding to occur and corresponds to higher strain hardening exponents. The remarkable increasing in tensile elongation of AF at 450 degrees C is ascribed mainly to the occurrence of grain boundary sliding.

引用

页码：129 / 138

页数：10

共 50 条

[41] Effect of Yttrium Addition on Microstructural Characteristics and Superplastic Behavior of Friction Stir Processed ZK60 Alloy [J].

ZALuo ;

GMXie ;

ZYMa ;

GLWang ;

GDWang .

Journal of Materials Science & Technology, 2013, 29 (12) :1116-1122

[42] Effect of Yttrium Addition on Microstructural Characteristics and Superplastic Behavior of Friction Stir Processed ZK60 Alloy [J].

Luo, Z. A. ;

Xie, G. M. ;

Ma, Z. Y. ;

Wang, G. L. ;

Wang, G. D. .

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2013, 29 (12) :1116-1122

[43] Tensile Properties and Microstructural Evolution of an Al-Bearing Ferritic Stainless Steel at Elevated Temperatures [J].

Han, Ying ;

Sun, Jiaqi ;

Sun, Yu ;

Sun, Jiapeng ;

Ran, Xu .

METALS, 2020, 10 (01)

[44] Effect of Friction Stir Processing on the Microstructural Evolution and Tensile Behaviors of an α/β Dual-Phase Mg-Li-Al-Zn Alloy [J].

Yang, Chung-Wei .

MATERIALS TRANSACTIONS, 2014, 55 (02) :371-377

[45] Effect of tensile direction on mechanical properties and microstructural evolutions of rolled Mg-Al-Zn-Sn magnesium alloy sheets at room and elevated temperatures [J].

Yu, Zhao-Peng ;

Yan, Yu-Hao ;

Yao, Jia ;

Wang, Cheng ;

Zha, Min ;

Xu, Xin-Yu ;

Liu, Yan ;

Wang, Hui-Yuan ;

Jiang, Qi-Chuan .

JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 744 :211-219

[46] Enhancing metallurgical and mechanical properties of friction stir lap welding of Al-Cu using intermediate layer [J].

Akbari, M. ;

Bahemmat, P. ;

Haghpanahi, M. ;

Givi, M. -K. Besharati .

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2013, 18 (06) :518-524

[47] Mechanical Properties and Electrical Resistivity of the Friction Stir Spot-Welded Dissimilar Al-Cu Joints [J].

Mohanraj, N. ;

Kumar, N. Mathan ;

Prathap, P. ;

Ganeshan, P. ;

Raja, K. ;

Mohanavel, V. ;

Karthick, Alagar ;

Muhibbullah, M. .

INTERNATIONAL JOURNAL OF POLYMER SCIENCE, 2022, 2022

[48] Influence of tool geometry on material flow and mechanical properties of friction stir welded Al-Cu bimetals [J].

Beygi, R. ;

Mehrizi, M. Zarezadeh ;

Verdera, D. ;

Loureiro, A. .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2018, 255 :739-748

[49] Dynamic mechanical and microstructural analysis of graphite-reinforced Al6061 alloy processed by friction stir processing [J].

Reddy, K. Venkateswara ;

Guttikonda, Manohar .

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2025,

[50] Effects of cooling rate and TiC nanoparticles on the microstructure and tensile properties of an Al-Cu cast alloy [J].

Liu, Xiao ;

Zhao, Qinglong ;

Jiang, Qichuan .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 790

← 1 2 3 4 5 →