Tensile Properties of a Friction Stir Processed Al-Cu 2218 Alloy at Elevated Temperatures and Related Microstructural Characteristics

被引：0
作者：
Chen, Ssu-Ta [1 ]
Lui, Truan-Sheng [1 ]
Chen, Li-Hui [1 ]
机构：
[1] Natl Cheng Kung Univ, Dept Mat Sci & Engn, Tainan 70101, Taiwan
来源：
TMS 2010 139TH ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 1: MATERIALS PROCESSING AND PROPERTIES | 2010年
关键词：
friction stir process; tensile elongation; grain boundary sliding; GRAIN-SIZE; SUPERPLASTICITY; ALUMINUM; PRECIPITATION; FORMABILITY; STABILITY; WELDS;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Tensile tests of as extruded (F) and as friction stir processed (FFSP) Al-Cu 2218 alloy are conducted at elevated temperatures from room temperature to 450 degrees C, respectively. From room temperature to 300 degrees C, F samples perform a higher tensile flow stress than FFSP samples, and this is resulted from an effect of natural aging. On the other hand, the stable FFSP microstructures promote grain boundary sliding to occur and corresponds to higher strain hardening exponents. The remarkable increasing in tensile elongation of AF at 450 degrees C is ascribed mainly to the occurrence of grain boundary sliding.
引用
收藏
页码：129 / 138
页数：10
相关论文
共 50 条
[31]   Relationship between deformation behavior and microstructural evolution of friction stir processed Zn-22 wt.% Al alloy [J].
Hirata, Tomotake ;
Tanaka, Tsutomu ;
Chung, Sung Wook ;
Takigawa, Yorinobu ;
Higashi, Kenji .
SCRIPTA MATERIALIA, 2007, 56 (06) :477-480
[32]   Effect of Friction Stir Welding Parameters on the Mechanical and Microstructure Properties of the Al-Cu Butt Joint [J].
Celik, Sare ;
Cakir, Recep .
METALS, 2016, 6 (06)
[33]   Effect of friction stir welding parameters on the microstructure and mechanical properties of the dissimilar Al-Cu joints [J].
Xue, P. ;
Ni, D. R. ;
Wang, D. ;
Xiao, B. L. ;
Ma, Z. Y. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (13-14) :4683-4689
[34]   Enhanced mechanical properties of friction stir welded dissimilar Al-Cu joint by intermetallic compounds [J].
Xue, P. ;
Xiao, B. L. ;
Ni, D. R. ;
Ma, Z. Y. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (21-22) :5723-5727
[35]   Effects of Additives on the Microstructures and Tensile Properties of a New Al-Cu Based Alloy Intended for Automotive Castings [J].
Elgallad, E. M. ;
Samuel, A. M. ;
Samuel, F. H. ;
Doty, H. W. .
TRANSACTIONS OF THE AMERICAN FOUNDRY SOCIETY, VOL 118, 2010, 118 :39-+
[36]   MICROSTRUCTURAL CHARACTERIZATION AND PHYSICAL PROPERTIES OF TiC REINFORCED Al-Cu MATRIX ALLOY COMPOSITES [J].
Kaftelen, Huelya ;
Uenlue, Necip ;
Oevecoglu, M. Luetfi ;
Henein, Hani .
TMS 2009 138TH ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 3: GENERAL PAPER SELECTIONS, 2009, :271-+
[37]   Tensile Fracture Behavior of Friction Stir Processed Al-7Si-0.3Mg Cast Alloy [J].
Chen, Zhan W. ;
Abraham, Francis ;
Walker, Joshua .
THERMEC 2011, PTS 1-4, 2012, 706-709 :971-976
[38]   Effects of in-process cryocooling on metallurgical and mechanical properties of friction stir processed Al7075 alloy [J].
Kumar, Atul ;
Godasu, Ashwin Kumar ;
Pal, Kaushik ;
Mula, Suhrit .
MATERIALS CHARACTERIZATION, 2018, 144 :440-447
[39]   Effect of Fe particles on the microstructural evolution and mechanical properties of friction welded Al-Cu components [J].
Alex, Abin Joe ;
Vignesh, R. Vaira ;
Padmanaban, R. ;
Govindaraju, M. .
AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING, 2022, 20 (03) :855-865
[40]   Effects of nanometric inclusions on the microstructural characteristics and strengthening of a friction-stir processed aluminum-magnesium alloy [J].
Khodabakhshi, F. ;
Simchi, A. ;
Kokabi, A. H. ;
Svec, P. ;
Simancik, F. ;
Gerlich, A. P. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 642 :215-229
12345