Tensile Properties of a Friction Stir Processed Al-Cu 2218 Alloy at Elevated Temperatures and Related Microstructural Characteristics

被引：0
|
作者：
Chen, Ssu-Ta [1 ]
Lui, Truan-Sheng [1 ]
Chen, Li-Hui [1 ]
机构：
[1] Natl Cheng Kung Univ, Dept Mat Sci & Engn, Tainan 70101, Taiwan
来源：
TMS 2010 139TH ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 1: MATERIALS PROCESSING AND PROPERTIES | 2010年
关键词：
friction stir process; tensile elongation; grain boundary sliding; GRAIN-SIZE; SUPERPLASTICITY; ALUMINUM; PRECIPITATION; FORMABILITY; STABILITY; WELDS;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Tensile tests of as extruded (F) and as friction stir processed (FFSP) Al-Cu 2218 alloy are conducted at elevated temperatures from room temperature to 450 degrees C, respectively. From room temperature to 300 degrees C, F samples perform a higher tensile flow stress than FFSP samples, and this is resulted from an effect of natural aging. On the other hand, the stable FFSP microstructures promote grain boundary sliding to occur and corresponds to higher strain hardening exponents. The remarkable increasing in tensile elongation of AF at 450 degrees C is ascribed mainly to the occurrence of grain boundary sliding.
引用
收藏
页码：129 / 138
页数：10
相关论文
共 50 条
  • [1] Examination of the Tensile Deformation Resistance and Ductility of Friction Stir Processed Al-Cu 2218 Alloy at Elevated Temperatures
    Chen, Ssu-Ta
    Lui, Truan-Sheng
    Chen, Li-Hui
    MATERIALS TRANSACTIONS, 2010, 51 (08) : 1474 - 1480
  • [2] Microstructure and Conductivity of the Al-Cu Joint Processed by Friction Stir Welding
    Wei, Yanni
    Li, Hui
    Xiao, Peng
    Zou, Juntao
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2020, 2020
  • [3] Effect of grain size refinement and precipitation reactions on strengthening in friction stir processed Al-Cu alloys
    Feng, Xiuli
    Liu, Huijie
    Babu, Sudarsanam Suresh
    SCRIPTA MATERIALIA, 2011, 65 (12) : 1057 - 1060
  • [4] TENSILE PROPERTIES AND MICROSTRUCTURAL EVOLUTION OF FRICTION STIR PROCESSED EXTRUDED AZ31B ALLOY
    Babu, S. Ramesh
    Kumar, V. S. Senthil
    Balasubramanian, V.
    Reddy, G. Madhusudhan
    MECHANICAL AND AEROSPACE ENGINEERING, PTS 1-7, 2012, 110-116 : 606 - +
  • [5] Hot tensile deformation and fracture behavior of friction stir processed Al-Si-Cu alloy
    Golafshani, Kamran Babapour
    Nourouzi, Salman
    Aval, Hamed Jamshidi
    CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2021, 35 : 41 - 52
  • [6] Tribological and microstructural evaluation of friction stir processed Al2024 alloy
    Zahmatkesh, B.
    Enayati, M. H.
    Karimzadeh, F.
    MATERIALS & DESIGN, 2010, 31 (10) : 4891 - 4896
  • [7] Effect of Revolutionary Pitch on the Microhardness Drop and Tensile Properties of Friction Stir Processed 1050 Aluminum Alloy
    Chen, Ssu-Ta
    Lui, Truan-Sheng
    Chen, Li-Hui
    MATERIALS TRANSACTIONS, 2009, 50 (08) : 1941 - 1948
  • [8] Mechanical properties and microstructural evolution of high-pressure torsion-processed Al7075 alloy at elevated temperatures
    Oh, Juhee
    Park, Sangeun
    Bae, Hyo Ju
    Son, Sujung
    Kim, Hyoung Seop
    Seol, Jae Bok
    Sung, Hyokyung
    Kim, Jung Gi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 835
  • [9] Microstructure and mechanical properties of a friction stir processed Al-Zn-Mg-Cu alloy
    Vargas, Margarita
    Lathabai, Sri
    MATERIA-RIO DE JANEIRO, 2010, 15 (02): : 270 - 277
  • [10] Microstructure and Mechanical Properties of a Friction Stir Processed Al-Zn-Mg-Cu Alloy
    Vargas, M.
    Lathabai, S.
    PRICM 7, PTS 1-3, 2010, 654-656 : 1428 - 1431
12345