Friction welding of porous aluminum and polycarbonate plate

被引：9

作者：

Hangai, Yoshihiko ^{[1
]}

Kishimoto, Rikuto ^{[1
]}

Ando, Mizuki ^{[1
]}

Mitsugi, Hironao ^{[1
]}

Goto, Yu ^{[1
]}

Kamakoshi, Yuichiroh ^{[2
]}

Suzuki, Ryosuke ^{[1
]}

Matsubara, Masaaki ^{[1
]}

Aoki, Yasuhiro ^{[3
]}

Fujii, Hidetoshi ^{[3
]}

机构：

[1] Gunma Univ, Grad Sch Sci & Technol, Kiryu, Gumma 3768515, Japan

[2] Gunma Ind Technol Ctr, Appl Mech Engn Sect, Maebashi, Gumma 3792147, Japan

[3] Osaka Univ, Joining & Welding Res Inst, Ibaraki 5670047, Japan

来源：

MATERIALS LETTERS | 2021年 / 304卷

关键词：

Porous materials; Powder technology; Composite materials; Foam; Welding; FOAM;

D O I：

10.1016/j.matlet.2021.130610

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Composite materials consisting of porous aluminum and resin are expected to meet the current demand for the weight reduction of parts. The objective of this study is to introduce friction welding for joining porous aluminum and a polycarbonate plate. The advantages of friction welding are that it is a simple process and the joining surface is locally and directly heated by the friction heat generated between the porous aluminum and the polycarbonate plate. We showed that joining of porous aluminum and a polycarbonate plate can be achieved by friction welding via the anchor effect without the collapse of pores. The observed joining strength was similar to the strength of the porous aluminum itself.

引用

页数：4

共 10 条

[1] On the feasibility of friction spot joining in magnesium/fiber-reinforced polymer composite hybrid structures [J].

Amancio-Filho, S. T. ;

Bueno, C. ;

dos Santos, J. F. ;

Huber, N. ;

Hage, E., Jr. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (10-11) :3841-3848

[2] Fabrication of Al foam with harmonic structure by Cu addition using sintering and dissolution process [J].

Hangai, Yoshihiko ;

Morita, Tomoaki ;

Utsunomiya, Takao .

MATERIALS LETTERS, 2018, 230 :120-122

[3] Novel strengthening method of closed-cell aluminum foams through surface treatment by resin [J].

Kitazono, Koichi ;

Suzuki, Ryosuke ;

Inui, Yuta .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (07) :3550-3554

[4] Joining of metal to plastic using friction lap welding [J].

Liu, F. C. ;

Liao, J. ;

Nakata, K. .

MATERIALS & DESIGN, 2014, 54 :236-244

[5] Plastic joining of open-cell nickel foam and polymethyl methacrylate (PMMA) sheet by friction stir incremental forming [J].

Matsumoto, Ryo ;

Sakaguchi, Harutaka ;

Otsu, Masaaki ;

Utsunomiya, Hiroshi .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2020, 282 (282)

[6] Filling of surface pores of aluminum foam with polyamide by selective laser melting for improvement in mechanical properties [J].

Matsumoto, Ryo ;

Kanatani, Shigehiro ;

Utsunomiya, Hiroshi .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2016, 237 :402-408

[7] Small object low-velocity impact damage on hybrid sandwich structures with CFRP face sheets and aluminum foam cores [J].

Rupp, Peter ;

Elsner, Peter ;

Weidenmann, Kay A. .

INTERNATIONAL JOURNAL OF CRASHWORTHINESS, 2018, 23 (06) :697-710

[8] Carbon-fiber aluminum-foam sandwich with short aramid-fiber interfacial toughening [J].

Sun, Zhi ;

Jeyaraman, J. ;

Sun, Shiyong ;

Hu, Xiaozhi ;

Chen, Haoran .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2012, 43 (11) :2059-2064

[9] Advances in friction welding process: a review [J].

Uday, M. B. ;

Fauzi, M. N. Ahmad ;

Zuhailawati, H. ;

Ismail, A. B. .

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2010, 15 (07) :534-558

[10] A novel sintering-dissolution process for manufacturing Al foams [J].

Zhao, YY ;

Sun, DX .

SCRIPTA MATERIALIA, 2001, 44 (01) :105-110

← 1 →