Fabrication of SiC fiber reinforced SiC composite by chemical vapor infiltration for excellent mechanical properties

被引：51

作者：

Igawa, N ^{[1
]}

Taguchi, T

Nozawa, T

Snead, LL

Hinoki, T

McLaughlin, JC

Katoh, Y

Jitsukawa, S

Kohyama, A

机构：

[1] Japan Atom Energy Res Inst, Tokai, Ibaraki 3191195, Japan

[2] Oak Ridge Natl Lab, Oak Ridge, TN 37830 USA

[3] Kyoto Univ, Uji, Kyoto 6110011, Japan

来源：

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS | 2005年 / 66卷 / 2-4期

关键词：

ceramics; interface; vapour deposition;

D O I：

10.1016/j.jpcs.2004.06.030

中图分类号：

O6 [化学];

学科分类号：

0703 ;

摘要：

The process optimization for the forced-flow/thermal gradient chemical vapor infiltrated SiC based composites with an advanced SiC fiber(Tyranno SA) was carried out. The new SiC/SiC composites had a lower porosity and the uniform distribution of pores compared with conventional CVI. The uniform interphases between SiC fibers and matrix could be obtained by reversing the gas-flow direction mid-way through the coating process. The tensile strength was slightly increased with the thickness of carbon interphase in the range of 20-250 nm. It was found that the fabric layer orientation and multilayer SiC/C interphase were very effective to improve the mechanical properties. (c) 2004 Elsevier Ltd. All rights reserved.

引用

页码：551 / 554

页数：4

共 8 条

[1] FABRICATION OF CERAMIC COMPOSITES - FORCED CVI [J].

BESMANN, TM ;

MCLAUGHLIN, JC ;

LIN, HT .

JOURNAL OF NUCLEAR MATERIALS, 1995, 219 :31-35

[2] Critical issues and current status of SiC/SiC composites for fusion [J].

Hasegawa, A ;

Kohyama, A ;

Jones, RH ;

Snead, LL ;

Riccardi, B ;

Fenici, P .

JOURNAL OF NUCLEAR MATERIALS, 2000, 283 (PART I) :128-137

[3] Optimizing the fabrication process for superior mechanical properties in the FCVISiC matrix/stoichiometric SiC fiber composite system [J].

Igawa, N ;

Taguchi, T ;

Snead, LL ;

Katoh, Y ;

Jitsukawa, S ;

Kohyama, A ;

McLaughlin, JC .

JOURNAL OF NUCLEAR MATERIALS, 2002, 307 (2 SUPPL.) :1205-1209

[4] High-strength alkali-resistant sintered SiC fibre stable to 2,200 °C [J].

Ishikawa, T ;

Kohtoku, Y ;

Kumagawa, K ;

Yamamura, T ;

Nagasawa, T .

NATURE, 1998, 391 (6669) :773-775

[5] Recent advances in the development of SiC/SiC as a fusion structural material [J].

Jones, RH ;

Snead, LL ;

Kohyama, A ;

Fenici, P .

FUSION ENGINEERING AND DESIGN, 1998, 41 :15-24

[6] Promise and challenges of SiCf/SiC composites for fusion energy applications [J].

Jones, RH ;

Giancarli, L ;

Hasegawa, A ;

Katoh, Y ;

Kohyama, A ;

Riccardi, B ;

Snead, LL ;

Weber, WJ .

JOURNAL OF NUCLEAR MATERIALS, 2002, 307 (2 SUPPL.) :1057-1072

[7]

Nozawa T, 2002, CERAM TRANS, V144, P245

[8] Microstructure and oxidative degradation behavior of silicon carbide fiber Hi-Nicalon type S [J].

Takeda, M ;

Urano, A ;

Sakamoto, J ;

Imai, Y .

JOURNAL OF NUCLEAR MATERIALS, 1998, 258 :1594-1599

← 1 →