The effect of aging treatment on the indentation properties of a nickel boride layer

被引：6
作者：
Mejia-Caballero, I [1 ]
Sebastian-Cardenas, N. [1 ]
Figueroa-Lopez, U. [2 ]
Martinez-Trinidad, J. [1 ]
Campos-Silva, I [1 ]
机构：
[1] Inst Politecn Nacl, Grp Ingn Superficies, SEPI ESIME, UP Adolfo Lopez Mateos, Ciudad De Mexico 07738, Mexico
[2] Tecnol Monterrey, Escuela Ingn & Ciencias, Carretera Lago Guadalupe Km 3-5, Atizapan De Zaragoza 52926, Mexico
来源：
MATERIALS TODAY COMMUNICATIONS | 2021年 / 26卷 / 26期
关键词：
Boride layer; Double aging treatment; Microstructure; Diffusion; Indentation properties;
D O I：
10.1016/j.mtcomm.2020.101907
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The mechanical performance of a nickel boride layer formed on an Inconel 718 superalloy at 1173 K with an exposure time of 6 h and a double aging treatment (DAT) was obtained. The effect of the DAT led to the redistribution of boron and niobium along the depth of the layer-substrate system, increasing the depth of the diffusion zone, and extending the depth of the compressive residual stresses in the layer. In particular, the DAT enhanced the fracture resistance by approximately 1.5 times compared with that of the layer not exposed to the treatment.
引用
收藏
页数：5
相关论文
共 13 条
  • [1] Sliding wear resistance of nickel boride layers on an Inconel 718 superalloy
    Campos-Silva, I
    Contla-Pacheco, A. D.
    Figueroa-Lopez, U.
    Martinez-Trinidad, J.
    Garduno-Alva, A.
    Ortega-Aviles, M.
    [J]. SURFACE & COATINGS TECHNOLOGY, 2019, 378
  • [2] Effects of scratch tests on the adhesive and cohesive properties of borided Inconel 718 superalloy
    Campos-Silva, I.
    Contla-Pacheco, A. D.
    Ruiz-Rios, A.
    Martinez-Trinidad, J.
    Rodriguez-Castro, G.
    Meneses-Amador, A.
    Wong-Angel, W. D.
    [J]. SURFACE & COATINGS TECHNOLOGY, 2018, 349 : 917 - 927
  • [3] Development of semi-empirical formulation for extracting materials properties from nanoindentation measurements: Residual stresses, substrate effect, and creep
    Chen, Kuo-Shen
    Chen, Tuo-Cheng
    Ou, Kuang-Shun
    [J]. THIN SOLID FILMS, 2008, 516 (08) : 1931 - 1940
  • [4] Vickers Indentation Fracture (VIF) modeling to analyze multi-cracking toughness of titania, alumina and zirconia plasma sprayed coatings
    Chicot, D.
    Duarte, G.
    Tricoteaux, A.
    Jorgowski, B.
    Leriche, A.
    Lesage, J.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 527 (1-2): : 65 - 76
  • [5] Effect of standard heat treatment on microstructure and properties of borided Inconel 718
    Deng, De-wei
    Wang, Chun-guang
    Liu, Qian-qian
    Niu, Ting-ting
    [J]. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2015, 25 (02) : 437 - 443
  • [6] Review of analysis and interpretation of nanoindentation test data
    Fischer-Cripps, AC
    [J]. SURFACE & COATINGS TECHNOLOGY, 2006, 200 (14-15) : 4153 - 4165
  • [7] Load dependence of the apparent hardness of silicon nitride in a wide range of loads
    Gong, JH
    Wu, JJ
    Guan, ZD
    [J]. MATERIALS LETTERS, 1998, 35 (1-2) : 58 - 61
  • [8] Krukovich M.G., 2016, Plasticity of Boronized Layers
  • [9] HARDNESS, TOUGHNESS, AND BRITTLENESS - INDENTATION ANALYSIS
    LAWN, BR
    MARSHALL, DB
    [J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1979, 62 (7-8) : 347 - 350
  • [10] Nanomechanical properties and fracture toughness of hard ceramic layer produced by gas boriding of Inconel 600 alloy
    Makuch, N.
    [J]. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2020, 30 (02) : 428 - 448
12