Enhancing creep resistance of aged Fe-Cr-Ni medium-entropy alloy via nano-sized Cu-rich and NbC precipitates investigated by nanoindentation

被引:17
|
作者
Gao, Jianbing [1 ]
Xu, Zhenlin [1 ]
Fang, Xudong [2 ]
He, Junjing [3 ]
Li, Weihuo [1 ]
Du, Xiaojie [1 ]
He, Yizhu [1 ]
Jia, Xiquan [1 ]
Zhou, Shengxuan [1 ]
机构
[1] Anhui Univ Technol, Sch Mat Sci & Engn, Maanshan 243002, Peoples R China
[2] Taiyuan Iron & Steel Grp Co Ltd, State Key Lab Adv Stainless Steel, Taiyuan 030003, Peoples R China
[3] Hangzhou Dianzi Univ, Sch Mat & Environm Engn, Hangzhou 310018, Peoples R China
关键词
Medium -entropy alloy; Creep; Precipitate; Nanoindentation; Aging; SIGMA-PHASE PRECIPITATION; ACTIVATION VOLUME; LOADING RATE; STRAIN-RATE; BEHAVIOR; STEEL; MICROSTRUCTURE; DEFORMATION; TEMPERATURE; NANOCRYSTALLINE;
D O I
10.1016/j.jmrt.2022.08.018
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Materials with high creep resistance are required for next-generation fossil and nuclear power plants. In this study, the effect of aging on the creep resistance of a Fe-Cr-Ni medium-entropy alloy (MEA) was investigated via a nanoindentation test. The precipitate evolution in the aged MEA was analyzed by the electron channeling contrast imaging (ECCI) technique. The volume fraction and size of the precipitates in different aging states were characterized and analyzed quantitatively. The strain rate sensitivity and activation volume were estimated to analyze the creep properties and mechanism. The precipitates of the MEA evolved with aging time, consisting of Z phases, M23C6 carbides, Cu-rich, and NbC particles. With the extension of aging time, the strain rate sensitivity first increased, then decreased, and finally tended to be stable. The creep behavior of the Fe-Cr-Ni MEA was controlled by the interaction between dislocation and precipitates. The Fe-Cr-Ni MEA has excellent creep resistance after long-term aging, benefiting from the nano-sized Cu -rich and NbC precipitates that significantly enlarged the dislocation pinning effect. The understandings obtained from this work could benefit the development and optimization of the creep-resistant MEAs.(c) 2022 The Author(s). Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
引用
收藏
页码:1860 / 1872
页数:13
相关论文
共 3 条
  • [1] Effect of Cu-Rich Phase Growth on Creep Deformation of Fe-Cr-Ni-Cu Medium-Entropy Alloy: A Phase Field Study
    Gao, Jianbing
    Hu, Lei
    Ma, Ninshu
    Fang, Xudong
    Xu, Zhenlin
    He, Yizhu
    METALS, 2023, 13 (07)
  • [2] Enhancing Reciprocating Wear Resistance of Co37Cr28Ni31Al2Ti2 Spark Plasma Sintered Medium-Entropy Alloy via TiC Addition
    Zhao, Yubo
    Ma, Wenbo
    Tisov, Oleksandr
    MATERIALS, 2025, 18 (02)
  • [3] A New Fe20Co20Ni20Cr10Cu30 High-Entropy Alloy: Microstructure, Sliding Wear Resistance, Nano-indentation Creep Response, and Electrochemical Corrosion Behavior
    Kiape, Stavros
    Kikirikos, Theofanis
    Georgatis, Emmanuel
    Kamnis, Spyros
    Sfikas, Athanasios K.
    Matikas, Theodoros E.
    Ananiadis, Elias
    Karantzalis, Alexander E.
    METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS, 2024, 13 (04) : 676 - 694