Enhanced dynamic exergy analysis of a micro-jet (μ-jet) engine at various modes

被引:11
作者
Balli, Ozgur [1 ]
Aygun, Hakan [2 ]
Turan, Onder [3 ]
机构
[1] Minist Natl Def, Gen Directorate Mil Factories, Air Maintenance Factory Directorate 1, TR-26120 Eskisehir, Turkey
[2] Firat Univ, Dept Air Frame & Power Plant, TR-23119 Elazig, Turkey
[3] Eskisehir Tech Univ, Fac Aeronaut & Astronaut, TR-26450 Eskisehir, Turkey
关键词
Advance exergy; Microjet; Turbojet; Propulsion; TURBOPROP ENGINE; PERFORMANCE; DESTRUCTION; EVALUATE;
D O I
10.1016/j.energy.2021.121911
中图分类号
O414.1 [热力学];
学科分类号
摘要
In the current study, advanced exergo-dynamic analysis of a micro-turbo jet (mu-jet) along with conventional exergy analysis is presented in various running shaft speed modes. In this context, major advanced exergetic indicators of mu-jet components are evaluated at the various running testing. The operation modes were represented as operation shaft speeds between 48,850 and 77,000 RPM (revolution per minute), while mu-jet produced within the range of 45.01-121.27 N thrust force in these modes. Improvement potentials of turbomachinery components and exergy destruction rates are calculated throughout the real-time testing modes. According to the analysis, the combustor has the lowest exergy efficiency ranging from 41.06% to 50.18%. Also, the study shows that the exergy efficiency values of the experimental mu-jet are found to be as 6.56% at Mode-1, 10.12% at Mode-2, 15.46% at Mode-3 and 17.02% at Mode-4, respectively. Other important findings for mu-jet are that unavoidable exergy destruction rate varies between 94.89% and 95.79%, while endogenous exergy destruction value changes between 89.79% and 91.47% in these modes. Thanks to the present analysis, the methods decreasing avoidable exergy destruction that changes between 4.21% and 5.11% could be focused. (C) 2021 Elsevier Ltd. All rights reserved.
引用
收藏
页数:22
相关论文
共 50 条
  • [1] Bifurcation of a liquid micro-jet in a vacuum
    Yaskin, A. S.
    Zarvin, A. E.
    Dubrovin, K. A.
    Kalyada, V. V.
    VACUUM, 2022, 198
  • [2] Influence of Gas Dynamic Virtual Nozzle Geometry on Micro-Jet Characteristics
    Zahoor, Rizwan
    Bajt, Sasa
    Sarler, Bozidar
    INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 2018, 104 : 152 - 165
  • [3] Flow and thermal analysis of the transition scheme between micro-channel and micro-jet cooling solution
    Guo, Yuming
    Fan, Liang-Liang
    Zhao, Liang
    APPLIED THERMAL ENGINEERING, 2023, 225
  • [4] Diagnosis of oxide films by cavitation micro-jet impact
    Chen, YJ
    Huang, LW
    Shih, TS
    MATERIALS TRANSACTIONS, 2003, 44 (02) : 327 - 335
  • [5] Effects of pulse voltage on piezoelectric micro-jet for lubrication
    Li, Kai
    Liu, Jun-kao
    Chen, Wei-shan
    Zhang, Lu
    MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2017, 23 (08): : 3081 - 3089
  • [6] Effect of defect angle and wavelength on micro-jet forms
    Chao, L.
    Pei, W.
    Qijing, F.
    ADVANCES IN FLUID MECHANICS XI, 2016, 105 : 243 - 251
  • [7] THE MEASUREMENT ON MICRO-JET IMPULSE BASED ON LASER INTERFEROMETER
    Ping, Zhu
    Hou Liya
    Zhang Weiyi
    PROCEEDINGS OF THE ASME FLUIDS ENGINEERING DIVISION SUMMER CONFERENCE, VOL 1, PTS A-C, 2009, : 1707 - 1714
  • [8] A Lorentz Force Powered Controllable Micro-Jet Injection System
    Chen, Kai
    Miao, Laiwu
    PROCEEDINGS OF THE 2015 INTERNATIONAL CONFERENCE ON COMPUTER SCIENCE AND ENGINEERING TECHNOLOGY (CSET2015), MEDICAL SCIENCE AND BIOLOGICAL ENGINEERING (MSBE2015), 2016, : 170 - 178
  • [9] Micro-jet plasma CVD with HMDSO/O2
    Silmy, K
    Holländer, A
    Dillmann, A
    Thömel, J
    SURFACE & COATINGS TECHNOLOGY, 2005, 200 (1-4) : 368 - 371
  • [10] Micro-jet Cooling by Compressed Air after MAG Welding
    Wegrzyn, T.
    Piwnik, J.
    Tarasiuk, W.
    Stanik, Z.
    Gabrylewski, M.
    ARCHIVES OF FOUNDRY ENGINEERING, 2016, 16 (02) : 111 - 114