Effect of Compression Process of MWCNT-Reinforced Al6061 Powder on Densification Characteristics and Its Mechanical Properties

被引：9

作者：

Seo, Hyung Yoon ^{[1
]}

Jiang, Long Rui ^{[2
]}

Kang, Chung Gil ^{[3
]}

Jin, Chul Kyu ^{[4
]}

机构：

[1] GCRC SOP, San 30 Chang Jun Dong, Busan 46241, South Korea

[2] Pusan Natl Univ, Grad Sch, Precis Mfg Syst Div, San 30 Chang Jun Dong, Busan 46241, South Korea

[3] Pusan Natl Univ, Sch Mech Engn, San 30 Chang Jun Dong, Busan 46241, South Korea

[4] Kyungnam Univ, Sch Mech Engn, 7 Kyungnamdaehak Ro, Changwon Si 51767, Gyeongsangnam D, South Korea

来源：

METALS | 2017年 / 7卷 / 10期

基金：

新加坡国家研究基金会;

关键词：

MWCNTs/Al6061; composites; open-die forging; sintering; mechanical properties; microstructure; ALUMINUM COMPOSITE; CARBON NANOTUBES;

D O I：

10.3390/met7100437

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this paper, aluminium-based (Al6061) composites with 1, 3, 5, 7, and 10 vol % of multi-walled carbon nanotubes (MWCNTs) are investigated. The composites are fabricated by high-energy ball milling, cold-compacting at room temperature under compacting pressures of 400-1600 MPa, and sintering at 620 degrees C in an argon gas atmosphere. Thereafter, the hardness and microstructure of MWCNTs/Al6061 composites are examined. Further, to improve the relative density and hardness level of the complex material, open-die forging is performed after cold-compacting under 1 GPa pressure at room temperature and sintering at 620 degrees C. The open-die forging parameters include 1, 3, 5, 7, and 10 vol % MWCNTs/Al6061, and Al6061. The experimental results show that the mechanical properties of the composites are significantly superior to that of the Al6061 alloy after undergoing cold-compacting, sintering, and open-die forging.

引用

页数：14

共 50 条

[41] Experimental analysis on the mechanical properties of Al6061 based hybrid composite reinforced with silicon carbide, bagasse fly ash and aloe vera ash [J].

Demisie, Leul Fenta ;

Getnet, Endashaw ;

Taddese, Getasew Ashagrie ;

Rengiah, Robinson Gnanadurai ;

Takele, Tayachew Nega ;

Ayalew, Yewondwosen Gzate ;

Berihun, Ermias Aswossie .

DISCOVER APPLIED SCIENCES, 2024, 6 (09)

[42] Comparative study of powder characteristics and mechanical properties of Al2024 nanocomposites reinforced with carbon-based additives [J].

Celebi, Muslim ;

Canakci, Aykut ;

Ozkaya, Serdar .

ADVANCED POWDER TECHNOLOGY, 2025, 36 (04)

[43] Mechanical properties of Al-Mg/MWCNT nanocomposite powder produced under different parameters of ball milling process [J].

Ahmadian, Hossein ;

Sallakhniknezhad, Reza ;

Zhou, Tianfeng ;

Kiahosseini, Seyed Rahim .

[44] Enhanced mechanical and wear properties of Al6061 alloy nanocomposite reinforced by CNT-template-grown core-shell CNT/SiC nanotubes [J].

Yoo, Sung Chan ;

Kang, Byungchul ;

Pham Van Trinh ;

Doan Dinh Phuong ;

Hong, Soon Hyung .

SCIENTIFIC REPORTS, 2020, 10 (01)

[45] Synergistic effects of TiC/GNP strengthening on the mechanical and tribological properties of Al6061 matrix composites coupled with process optimization by artificial neural network [J].

Turkoglu, Turker ;

Celik, Sare .

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2025, 239 (01) :181-193

[46] Effect of nano ZrB2 particles on physical, mechanical and corrosion properties of Al6061 metal-matrix nano composites through stir casting route [J].

Morampudi, Priyadarsini ;

Ramana, V. S. N. Venkata ;

Vikas, K. Sri ram ;

Rahul, R. ;

Prasad, Chitrada .

ENGINEERING RESEARCH EXPRESS, 2022, 4 (02)

[47] Al-MWCNT nanocomposite synthesized via spark plasma sintering: effect of powder milling and reinforcement addition on sintering kinetics and mechanical properties [J].

Singh, Lavish K. ;

Bhadauria, Alok ;

Laha, Tapas .

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2019, 8 (01) :503-512

[48] Effects of build orientation and heat treatment on microstructure, mechanical and corrosion properties of Al6061 aluminium parts built by cold spray additive manufacturing process [J].

Hutasoit, Novana ;

Javed, Muhammad Awais ;

Rashid, Rizwan Abdul Rahman ;

Wade, Scott ;

Palanisamy, Suresh .

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2021, 204

[49] Investigation of microstructure, mechanical, and tribological properties of SiC/h-BN/Gr hybrid reinforced Al6061 matrix composites produced by hot extrusion method [J].

Cinici, Henifi ;

Karakoc, Halil ;

Sahin, Omer ;

Ovali, Smail .

[50] Extending the mechanical property regime of laser powder bed fusion Sc-and Zr-modified Al6061 alloy by manipulating process parameters and heat treatment [J].

Zhu, Zhiguang ;

Hu, Zhiheng ;

Ng, Fern Lan ;

Seet, Hang Li ;

Nai, Sharon Mui Ling .

ADDITIVE MANUFACTURING, 2024, 85

← 1 2 3 4 5 →