Physico-Mechanical Properties of Commercially Available Tissue Conditioner Modified with Synthesized Chitosan Oligosaccharide

This study aims to compare the hardness, sorption and solubility of commercially available tissue conditioner [TC] modified with chitosan [CS] and synthesized chitosan oligosaccharide [COS] in antifungal concentration. COS was synthesized by acid hydrolysis and characterized by FTIR and XRD. Experimental materials were formulated by incorporating each per gram of TC powder with effective antifungal concentration of chitosan 1.02 mg (Group 1: TC-CS) and 0.51 mg COS (Group 2: TC-COS). A commercially available TC was used as control (Group 0: CTC). Shore A hardness test was performed according to ASTM D 2240-05 (2010) standards on samples stored in dry environment, distilled water (DW) and artificial saliva (AS) at 37 degrees C (n = 5 per group). Percent weight changes (n = 5 per group) after storage in DW and AS was used to record sorption and solubility. One-way Anova with post hoc Tukey's test was applied. FTIR and XRD confirmed low molecular weight and amorphous nature of COS. Experimental groups had higher Shore A hardness values; however, these changes were not significant. Greatest variations in durometer values (p <= 0.05) were observed during the first 24 h. Experimental groups had higher (p <= 0.05) percentage sorption and solubility. Samples stored in DW had significantly higher (p = 0.019) sorption, whereas material had higher (p = 0.005) solubility in AS. Mean solubility values in both immersion mediums was highest for Group 2, followed by group 1 and group 0. In addition, significant (p <= 0.05) increase in solubility upon aging was noted for each material. Experimental tissue conditioner had higher hardness, sorption and solubility. However, these changes are not substantial to interfere with their tissue healing property. Therefore, these materials may be considered and explored further as potential antimicrobial drug delivery agent for denture stomatitis patients.