Experimental study on condensation heat transfer characteristics of steam on horizontal twisted elliptical tubes

被引:67
作者
Zhang, Li [1 ]
Yang, Sheng [1 ]
Xu, Hong [1 ]
机构
[1] E China Univ Sci & Technol, Sch Mech & Power Engn, State Key Lab Chem Engn, Shanghai 200237, Peoples R China
基金
中国国家自然科学基金;
关键词
Steam condensation; Twisted elliptical tube; Heat transfer enhancement; LAMINAR-FILM CONDENSATION;
D O I
10.1016/j.apenergy.2011.11.085
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
An experimental research was conducted to investigate the heat transfer characteristics of steam condensation on horizontal twisted elliptical tubes (TETs) with different structural parameters. Experiments were carried out at the steam saturation temperature of around 100.5 degrees C with the wall subcooling from around 2 degrees C to 14 degrees C. Experimental results indicate that the condensation heat transfer coefficients for all the tubes reduce with the increase of wall subcooling, while the enhancement factor of each TET is almost constant. Not all the tested TETs have better condensation heat transfer performance than the smooth circular tube, the average enhancement factors provided by the five TETs range from 0.87 to 1.34. Condensation heat transfer coefficients increase with the rise of the tube ellipticities. The TET No. 3 with the largest ellipticity of 0.86 has the highest condensation heat transfer coefficient augmentation of around 34%. The TET with a twist pitch of 192 mm has a better condensation performance than the smooth circular tube when its ellipticity exceeds 0.77. A smaller twist pitch leads to a lower condensation heat transfer coefficient. The condensation heat transfer enhancement mechanism of the TETs has also been analysed. (C) 2011 Elsevier Ltd. All rights reserved.
引用
收藏
页码:881 / 887
页数:7
相关论文
共 21 条
[1]  
Asmantas L. A., 1985, Heat Transfer - Soviet Research, V17, P103
[2]  
BISHARA F, 2009, J HEAT TRANSFER, V131, P1
[3]  
Briggs D.E., 1969, Chemical Engineering Progress Symposium Series, V65, P35
[4]  
Butterworth D, 1996, ADVANCES IN INDUSTRIAL HEAT TRANSFER, P87
[5]   Process heat transfer 2010 [J].
Butterworth, D .
APPLIED THERMAL ENGINEERING, 2004, 24 (8-9) :1395-1408
[6]   Estimation of the Thermohydraulic Efficiency of Heat Exchanging Apparatuses with Twisted Tubes [J].
Dzyubenko, B. V. .
HEAT TRANSFER RESEARCH, 2006, 37 (04) :349-363
[7]   Influence of Flow Twisting on Convective Heat Transfer in Banks of Twisted Tubes [J].
Dzyubenko, B. V. .
HEAT TRANSFER RESEARCH, 2005, 36 (06) :449-459
[8]  
Gao Xue-nong, 2008, Journal of South China University of Technology, V36, P17
[9]  
GNIELINSKI V, 1976, INT CHEM ENG, V16, P359
[10]  
[顾红芳 Gu Hongfang], 2003, [工程热物理学报, Journal of Engineering Thermophysics], V24, P976