Formability of stainless steel

The forming behavior of austenitic stainless steels (types 201, 301, and 304) and ferritic stainless steels (types 437, 439, 444, and 468) was investigated. The tensile behavior and the forming-limit diagrams (FLDs) for these grades were determined. The ferritic alloys behave similarly to plain carbon steels and are relatively insensitive to small variations of strain rate and temperature. The formability of the austenitic alloys is influenced greatly by martensitic transformation during straining. The fraction of martensite transformed as a function of strain was found to be very sensitive to temperature, which, in turn, depends on the strain rate at typical testing rates (10(-3) to 10(-1)/s), At low rates (when the specimen remains near room temperature), the formability of the austenitic alloys is markedly improved by transformation strengthening. The enhancement of formability is largest on the biaxial side of the FLD, because the fraction martensite transformed was found to depend on the absolute thickness strain, which is maximized in the balanced biaxial strain state.