Study on the Microstructure and Fatigue Behavior of a Laser-Welded Ni-Based Alloy Manufactured by Selective Laser Melting Method

被引：24
作者：
Zhang, Yu [1 ]
Hu, XiaoAn [1 ]
Jiang, Yun [1 ]
机构：
[1] Nanchang Hangkong Univ, Sch Aircraft Engn, Qianhu Campus, Nanchang, Jiangxi, Peoples R China
来源：
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE | 2020年 / 29卷 / 05期
关键词：
creep-fatigue; microstructure; Ni-based alloy; low-cycle fatigue; selective laser melted; INCONEL; 625; MECHANICAL-PROPERTIES; PREDICTION; EVOLUTION;
D O I：
10.1007/s11665-020-04844-4
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Low-cycle fatigue and creep-fatigue tests were conducted at 815 degrees C on laser-welded, selective laser melted (SLM) Inconel 625 test specimens. The results showed that the microstructure of the welding zone was mainly composed of columnar dendrites, which grew epitaxially from the weld line and exhibited better fatigue and durability resistance than the non-welded SLM alloy. The low-cycle fatigue life and creep-fatigue life decreased with increasing test stress. Both fatigue and creep-fatigue properties were better for laser-welded SLM Inconel 625 specimens than non-welded specimens. High-density intergranular cracks formed in the gamma matrix at base material, which contained many intergranular precipitates. Precipitation of intermetallic delta and the intergranular carbides was responsible for the higher hardness of the fatigue and creep-fatigue specimens.
引用
收藏
页码：2957 / 2968
页数：12
相关论文
共 40 条
[1]   3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting [J].
Aboulkhair, Nesma T. ;
Simonelli, Marco ;
Parry, Luke ;
Ashcroft, Ian ;
Tuck, Christopher ;
Hague, Richard .
PROGRESS IN MATERIALS SCIENCE, 2019, 106
[2]  
Andersson J., 2015, Welding Metallurgy and Weldability, P388, DOI [10.1002/9781118960332.app4, DOI 10.1002/9781118960332.APP4]
[3]   Analysis of Hot Anisotropic Tensile Flow Stress and Strain Hardening Behavior for Inconel 625 Alloy [J].
Badrish, C. Anand ;
Kotkunde, Nitin ;
Mahalle, Gauri ;
Singh, Swadesh Kumar ;
Mahesh, K. .
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2019, 28 (12) :7537-7553
[4]   Study of Anisotropic Material Behavior for Inconel 625 Alloy at Elevated Temperatures [J].
Badrish, C. Anand ;
Kotkunde, Nitin ;
Salunke, Omkar ;
Singh, Swadesh Kumar .
MATERIALS TODAY-PROCEEDINGS, 2019, 18 :2760-2766
[5]   Build Orientation Effects on Texture and Mechanical Properties of Selective Laser Melting Inconel 718 [J].
Bean, G. E. ;
McLouth, T. D. ;
Witkin, D. B. ;
Sitzman, S. D. ;
Adams, P. M. ;
Zaldivar, R. J. .
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2019, 28 (04) :1942-1949
[6]   Laser Weldability of AlSi10Mg Alloy Produced by Selective Laser Melting: Microstructure and Mechanical Behavior [J].
Biffi, Carlo Alberto ;
Fiocchi, Jacopo ;
Tuissi, Ausonio .
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2019, 28 (11) :6714-6719
[7]   Investigation on edge joints of Inconel 625 sheets processed with laser welding [J].
Caiazzo, F. ;
Alfieri, V. ;
Cardaropoli, F. ;
Sergi, V. .
OPTICS AND LASER TECHNOLOGY, 2017, 93 :180-186
[8]   Influence of laser processing parameters on the surface characteristics of 316L stainless steel manufactured by selective laser melting [J].
Dursun, Gokhan ;
Ibekwe, Samuel ;
Li, Guoqiang ;
Mensah, Patrick ;
Joshi, Ghanashyam ;
Jerro, Dwayne .
MATERIALS TODAY-PROCEEDINGS, 2020, 26 :387-393
[9]   Mechanisms of high-temperature creep of nickel-based superalloys under low applied stresses [J].
Epishin, A ;
Link, T .
PHILOSOPHICAL MAGAZINE, 2004, 84 (19) :1979-2000
[10]   Heat transfer - a review of 2000 literature [J].
Goldstein, RJ ;
Eckert, ERG ;
Ibele, WE ;
Patankar, SV ;
Simon, TW ;
Kuehn, TH ;
Strykowski, PJ ;
Tamma, KK ;
Bar-Cohen, A ;
Heberlein, JVR ;
Davidson, JH ;
Bischof, J ;
Kulacki, FA ;
Kortshagen, U ;
Garrick, S .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2002, 45 (14) :2853-2957
1234