2138. Structural dynamic model updating based on Kriging model using frequency response data

被引：3

作者：

Wang, Jutao ^{[1
]}

Wang, Chunjie ^{[1
,2
]}

Zhao, Junpeng ^{[1
]}

机构：

[1] Beihang Univ, Sch Mech Engn & Automat, Beijing, Peoples R China

[2] Beihang Univ, State Key Lab Virtual Real Technol & Syst, Beijing, Peoples R China

来源：

JOURNAL OF VIBROENGINEERING | 2016年 / 18卷 / 06期

关键词：

model updating; metamodel; frequency response function; parameter selection; DAMAGE IDENTIFICATION;

D O I：

10.21595/jve.2016.16973

中图分类号：

R318 [生物医学工程];

学科分类号：

0831 ;

摘要：

Metamodel technique is attracting more and more attention in structural dynamic model updating. In this paper, an attempt is made to explore the effectiveness of Kriging method for acceleration frequency response function based model updating. A Kriging model is constructed based on the input variables selected by F-test method specially, which is applied to the results of design of experiment. The response of design of experiment is obtained based on the errors between acceleration response curves of analytical model and experimental model. Two examples of representative structure are discussed, the comparison of updated results of different metamodel shows that a less error of updated results can be obtained based on Kriging model, and the updated analytical model has a good prediction capability. It can be concluded that the Kriging model is suitable for the frequency response function based model updating.

引用

页码：3484 / 3498

页数：15

共 27 条

[1] An improvement of the response surface method [J].

Allaix, D. L. ;

Carbone, V. I. .

STRUCTURAL SAFETY, 2011, 33 (02) :165-172

[2]

Anthony A. G., 1999, S MULT AN OPT

[3] Modal analysis and testing of hexagonal honeycomb plates used for satellite structural design [J].

Boudjemai, A. ;

Amri, R. ;

Mankour, A. ;

Salem, H. ;

Bouanane, M. H. ;

Boutchicha, D. .

MATERIALS & DESIGN, 2012, 35 :266-275

[4] Adaptive response surface based efficient Finite Element Model Updating [J].

Chakraborty, Subrata ;

Sen, Arunabh .

FINITE ELEMENTS IN ANALYSIS AND DESIGN, 2014, 80 :33-40

[5]

Dey P., 2015, STRUCTURAL CONTROL H

[6] Structural finite element model updating using transfer function data [J].

Esfandiari, A. ;

Bakhtiari-Nejad, F. ;

Sanayei, M. ;

Rahai, A. .

COMPUTERS & STRUCTURES, 2010, 88 (1-2) :54-64

[7] Damage identification by response surface based model updating using D-optimal design [J].

Fang, Sheng-En ;

Perera, Ricardo .

MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2011, 25 (02) :717-733

[8]

Fei QG, 2013, J VIBROENG, V15, P9

[9] A Two-Step Model Updating Algorithm for Parameter Identification of Linear Elastic Damped Structures [J].

Garcia-Palencia, Antonio Javier ;

Santini-Bell, Erin .

COMPUTER-AIDED CIVIL AND INFRASTRUCTURE ENGINEERING, 2013, 28 (07) :509-521

[10] A comparison of two stochastic model updating methods using the DLR AIRMOD test structure [J].

Govers, Y. ;

Khodaparast, H. Haddad ;

Link, M. ;

Mottershead, J. E. .

MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2015, 52-53 :105-114

← 1 2 3 →