Poly(methyl methacrylate)-induced Microstructure and Hydrolysis Behavior Changes of Poly(L-lactic acid)/Carbon Nanotubes Composites

Poly(L-lactic acid) (PLLA)-based composites exhibit wide applications in many fields. However, most of hydrophilic fillers usually accelerate the hydrolytic degradation of PLLA, which is unfavorable for the prolonging of the service life of the articles. In this work, a small quantity of poly(methyl methacrylate) (PMMA) (2 wt%-10 wt%) was incorporated into the PLLA/carbon nanotubes (CNTs) composites. The effects of PMMA content on the dispersion of CNTs as well as the microstructure and hydrolytic degradation behaviors of the composites were systematically investigated. The results showed that PMMA promoted the dispersion of CNTs in the composites. Amorphous PLLA was obtained in all the composites. Largely enhanced hydrolytic degradation resistance was achieved by incorporating PMMA, especially at relatively high PMMA content. Incorporating 10 wt% PMMA led to a dramatic decrease in the hydrolytic degradation rate from 0.19 %/h of the PLLA/CNT composite sample to 0.059 %/h of the PLLA/PMMA-10/CNT composite sample. The microstructure evolution of the composites was also detected, and the results showed that no crystallization occurred in the PLLA matrix. Further results based on the interfacial tension calculation showed that the enhanced hydrolytic degradation resistance of the PLLA matrix was mainly attributed to the relatively strong interfacial affinity between PMMA and CNTs, which prevented the occurrence of hydrolytic degradation at the interface between PLLA and CNTs. This work provides an alternative method for tailoring the hydrolytic degradation ability of the PLLA-based composites.