The effect of cation distribution and heat treatment temperature on the structural, surface, morphological and magnetic properties of MnxCo1-xFe2O4@SiO2 nanocomposites

This paper presents the effect of Mn2+ substitution for Co2+, in CoFe2O4 embedded in SiO2 matrix, on the structural, surface, morphological and magnetic properties. X-ray diffraction (XRD) and Mossbauer spectroscopy indicate the presence of a nanocrystalline mixed cubic spinel. In all cases, for the nanocomposites (NCs) heat-treated at 200 degrees C, a single, low crystalline ferrite phase was remarked, while for the other heat-treatment temperatures up to 1200 degrees C and with increasing Mn content, the secondary phase of alpha-Fe2O3 appears, accompanied also by the secondary phase of SiO2 at 1200 degrees C. The Fourier transform infrared (FT-IR) spectroscopy confirms the consumption of starting metallic nitrates, the formation of Co-O, Mn-O, Fe-O bonds in ferrites@SiO2 matrix. The Mossbauer spectra show the characteristic magnetic patterns of Co and Mn spinels. According to the atomic force microscopy (AFM) analysis, the particle size increases from 15 to 80 nm with the increase of Mn content. The specific surface area varies in the range 150-450 m(2)/g due to the substitution of Co2+ ion with Mn2+ ion and decreases with increasing heat treatment temperature, reaching values below 1 m(2)/g at 1200 degrees C. All NCs have pores within the mesoporous range, with high dispersion of pores' sizes. Furthermore, the release of fine nanoparticles in aqueous environment is facilitated by the powders' mesoporous structure preserved at 200, 500 and 800 degrees C heat treatment temperatures. The porous network collapse after heat treatment at 1200 degrees C leads to releasing of bigger nanoparticles, in good agreement with AFM observation. Magnetization, coercivity and anisotropy evolve proportionally with the particle size for the NCs heat-treated at 800 degrees C (M-s = 18.9-36.3 emu/g; M-R = 3.05-14.1 emu/g, H-c = 31.83-53.2 kA/m, K= 0.378.10(-3) -1.21.10(-3) erg/cm(-1)) and inverse proportionally for those heat-treated at 1200 degrees C (M-s = 30.7-19.4 emu/g; M-R = 11.60 7.20 emu/g, H-c= 127.3-15.9 kA/m, K= 2.45.10(-3)-0.19.10(-3) erg/cm(-1)). The NCs with high Mn content heat-treated at 1200 degrees C show superparamagnetic behavior, while those with low Mn content display ferrimagnetic behavior. (C) 2021 Elsevier B.V. All rights reserved.