Comparison of Mechanical properties of AA6061 reinforced with (SiC/B4C) micro/nano ceramic particle reinforcements

被引：27

作者：

Das, Shubhajit ^{[1
]}

Chandrasekaran, M. ^{[2
]}

Samanta, S. ^{[2
]}

机构：

[1] NIT Arunachal Pradesh, Dept Mech Engn, Papum Pare 791112, Arunachal Prade, India

[2] NERIST, Dept Mech Engn, Itanagar 791109, Arunachal Prade, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2018年 / 5卷 / 09期

关键词：

Metal Matrix composites; hybrid metal matrix composites; AA6061; mechanical properties; ALUMINUM-ALLOY COMPOSITES; METAL-MATRIX COMPOSITES; DRY SLIDING WEAR; TENSILE PROPERTIES; SILICON-CARBIDE; B4C COMPOSITE; MICROSTRUCTURE;

D O I：

10.1016/j.matpr.2018.06.146

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Aluminium alloy (AA) based composites are finding wide acceptance in industries due to high performance efficiencies and superior properties. AA6061 based composites have found wide applicability in aerospace, automobiles and recreational industries. Hybrid metal matrix composites (HMMCs) have proved to have improved performance and excellent adaptability compared to single reinforced composites. In the present study, two compositions of HMMCs were fabricated using conventional stir casting route. AA6061 is used as the matrix material and nano SiC/B4C as reinforcements. Physical properties like density and porosity and mechanical properties like micro hardness, ultimate tensile strength and impact strength of these HMMCs were investigated and compared with single reinforced micro/nano composites. The HMMC was found to have improved mechanical properties. Significant improvement in ductility and porosity was seen when composites were reinforced with nano size reinforcements. (C) 2018 Elsevier Ltd. All rights reserved.

引用

页码：18110 / 18119

页数：10

共 26 条

[1] Effect of sub-micron Al2O3 concentration on dry wear properties of 6061 aluminum based composite [J].

Al-Qutub, AM ;

Allam, IM ;

Qureshi, TW .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 172 (03) :327-331

[2] Preparation and investigation of Al-4 wt% B4C nanocomposite powders using mechanical milling [J].

Alizadeh, A. ;

Taheri-Nassaj, E. ;

Baharvandi, H. R. .

BULLETIN OF MATERIALS SCIENCE, 2011, 34 (05) :1039-1048

[3]

Auradi V., 2014, PROCEDIA MAT SCI, V6, P1068, DOI DOI 10.1016/J.MSPRO.2014.07.177

[4] Aluminium matrix hybrid composites: a review of reinforcement philosophies; mechanical, corrosion and tribological characteristics [J].

Bodunrin, Michael Oluwatosin ;

Alaneme, Kenneth Kanayo ;

Chown, Lesley Heath .

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2015, 4 (04) :434-445

[5]

Chalmers IR., 2016, REF MODULE MAT SCI M, DOI [10.1016/B978-0-12-803581-8.02199-8, DOI 10.1016/B978-0-12-803581-8.02199-8]

[6] The design, microstructure and tensile properties of B4C particulate reinforced 6061Al neutron absorber composites [J].

Chen, H. S. ;

Wang, W. X. ;

Li, Y. L. ;

Zhang, P. ;

Nie, H. H. ;

Wu, Q. C. .

JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 632 :23-29

[7]

Das S, 2004, T INDIAN I METALS, V57, P325

[8] Friction and wear behaviors of B4C/6061Al composite [J].

Dou, Yuhai ;

Liu, Yong ;

Liu, Yanbin ;

Xiong, Zhiping ;

Xia, Qingbing .

MATERIALS & DESIGN, 2014, 60 :669-677

[9] PARTICULATE REINFORCED METAL MATRIX COMPOSITES - A REVIEW [J].

IBRAHIM, IA ;

MOHAMED, FA ;

LAVERNIA, EJ .

JOURNAL OF MATERIALS SCIENCE, 1991, 26 (05) :1137-1156

[10] Production and characterization of AA6061-B4C stir cast composite [J].

Kalaiselvan, K. ;

Murugan, N. ;

Parameswaran, Siva .

MATERIALS & DESIGN, 2011, 32 (07) :4004-4009

← 1 2 3 →