Thermal analysis of functionally graded coating AlSi alloy and steel pistons

被引：97

作者：

Buyukkaya, Ekrem ^{[1
]}

机构：

[1] Univ Sakarya, Fac Engn, Dept Mech Engn, TR-54187 Sakarya, Turkey

来源：

SURFACE & COATINGS TECHNOLOGY | 2008年 / 202卷 / 16期

关键词：

finite element method (FEM); thermal analysis; diesel engine piston; functionally graded coating;

D O I：

10.1016/j.surfcoat.2008.01.034

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Functionally graded coatings are coating systems used to increase performances of high temperature components in diesel engines. These coatings consist of a transition from the metallic bond layer to cermet and from cermet to the ceramic layer. In this study, thermal behavior of functional graded coatings on AlSi and steel piston materials was investigated by means of using a commercial code, namely ANSYS. Thermal analyses were employed to deposit metallic, cermet and ceramic powders such as NiCrAl, NiCrAl+MgZrO3 and MgZrO3 on the substrate. The numerical results of AN and steel pistons are compared with each other. It was shown that the maximum surface temperature of the functional graded coating AN alloy and steel pistons was increased by 28% and 17%, respectively. (C) 2008 Elsevier B.V. All rights reserved.

引用

页码：3856 / 3865

页数：10

共 30 条

[21] THERMAL BARRIER COATINGS WITH IMPROVED OXIDATION RESISTANCE [J].

SCHMITTTHOMAS, KG ;

DIETL, U .

SURFACE & COATINGS TECHNOLOGY, 1994, 68 :113-115

[22]

SCHNEIDER GA, 1990, FLORENCE, P24

[23]

Schwarz E, 1993, 930988 SAE

[24]

Stang JH, 1978, 780069 SAE

[25]

Sudhakar V, 1984, 840431 SAE

[26]

Wentworth J. Y., 1992, 920939 SAE

[27] Overview of thermal barrier coatings in diesel engines [J].

Yonushonis, TM .

JOURNAL OF THERMAL SPRAY TECHNOLOGY, 1997, 6 (01) :50-56

[28]

YONUSHONIS TM, 1988, DIESEL ENGINE EVALUA, P239

[29] Molten droplet solidification and substrate remelting in microcasting - Part I: numerical modeling and experimental verification [J].

Zarzalejo, LJ ;

Schmaltz, KS ;

Amon, CH .

HEAT AND MASS TRANSFER, 1999, 34 (06) :477-485

[30] Transient thermal analysis and coating formation simulation of thermal spray process by finite difference method [J].

Zhu, YL ;

Liao, HL ;

Coddet, C .

SURFACE & COATINGS TECHNOLOGY, 2006, 200 (16-17) :4665-4673

← 1 2 3 →