Stereolithography of ceramic suspensions

被引：76

作者：

Brady, G. Allen ^{[1
]}

Halloran, John W. ^{[1
]}

机构：

[1] Univ Michigan, Coll Engn, Dept Mat Sci & Engn, Ann Arbor, MI 48109 USA

来源：

RAPID PROTOTYPING JOURNAL | 1997年 / 3卷 / 02期

关键词：

D O I：

10.1108/13552549710176680

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Rapid prototyping of ceramics is accomplished with stereolithography by using an SLA machine to build the ceramic green from a UV-curable suspension of ceramic powders - a "ceramic resin". Objects are later sintered in a separate furnace to complete the process. Aluminum oxide resins based on hexanediol diacrylate are characterized for curing behaviour by photo-rheology and differential photo calorimetry with a UV lamp, and with a HeCd laser using "windowpanes", single strings, and walls.

引用

页码：61 / 65

页数：5

共 6 条

[1] Brady GA, 1996, SOL FREEFORM FABRIC, P403
[2] Griffith ML, 1996, J AM CERAM SOC, V79, P2601, DOI 10.1111/j.1151-2916.1996.tb09022.x
[3] GRIFFITH ML, 1997, J APPL PHYS IN PRESS
[4] Jacobs P. F., 1992, RAPID PROTOTYPING MA, P87
[5] RHEOLOGICAL BEHAVIOR OF EPOXY ACRYLATE PREPOLYMER DURING UV CURING
OTSUBO, Y
AMARI, T
WATANABE, K
[J]. JOURNAL OF APPLIED POLYMER SCIENCE, 1984, 29 (12) : 4071 - 4080
[6] DYNAMIC VISCOELASTIC MEASUREMENTS OF PHOTOSENSITIVE POLYMERS
WATANABE, K
AMARI, T
OTSUBO, Y
[J]. JOURNAL OF APPLIED POLYMER SCIENCE, 1984, 29 (01) : 57 - 66

← 1 →