Twenty-year uninterrupted endeavor of friction stir processing by focusing on copper and its alloys

被引：73

作者：

Ebrahimi, M. ^{[1
]}

Par, M. A. ^{[1
]}

机构：

[1] Univ Maragheh, Dept Mech Engn, Fac Engn, Maragheh, Iran

来源：

JOURNAL OF ALLOYS AND COMPOUNDS | 2019年 / 781卷

关键词：

Friction stir processing; Copper alloys; Mechanical properties; Microstructural analysis; SEVERE PLASTIC-DEFORMATION; MECHANICAL-PROPERTIES; PURE COPPER; REINFORCED COPPER; WEAR BEHAVIOR; SUPERPLASTIC DEFORMATION; ROTATIONAL SPEED; GRAIN-REFINEMENT; HEAT INPUT; MICROSTRUCTURE;

D O I：

10.1016/j.jallcom.2018.12.083

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

This work reviews friction stir processing (FSP), which is a prominent severe plastic deformation technique used to improve materials behaviors through grain refinement. Scientists have concentrated on this technique because it is the only strengthening mechanism providing superior properties of metals and alloys without sacrificing their toughness. It was found that the aforementioned technique has the capability to provide superior properties for single-phase and multiphase materials and even for the metal matrix composites. This study has been mainly restricted to review the FSP treatment of copper and its alloys because of their vast and valuable applications. (C) 2018 Elsevier B.V. All rights reserved.

引用

页码：1074 / 1090

页数：17

共 121 条

[11] Comparison of microstructure and mechanical properties of pure copper processed by twist extrusion and equal channel angular Pressing
Bar Bahadori, Sh Ranj
Dehghani, K.
Mousavi, S. A. A. Akbari
[J]. MATERIALS LETTERS, 2015, 152 : 48 - 52
[12] Effect of SiC Particles Dispersion on the Grain Size and Mechanical Properties of Cu/SiC Metal Matrix Nano-Composites Produced via MFSP
Barmouz, M.
Araee, A.
[J]. JOURNAL OF NANO RESEARCH, 2014, 26 : 53 - 58
[13] Investigation of mechanical properties of Cu/SiC composite fabricated by FSP: Effect of SiC particles' size and volume fraction
Barmouz, M.
Asadi, P.
Givi, M. K. Besharati
Taherishargh, M.
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (03): : 1740 - 1749
[14] Barmouz M, 2016, MATER RES-IBERO-AM J, V19, P1292, DOI [10.1590/1980-5373-mr-2016-0152, 10.1590/1980-5373-MR-2016-0152]
[15] Evaluation of Tensile Deformation Properties of Friction Stir Processed Pure Copper: Effect of Processing Parameters and Pass Number
Barmouz, Mohsen
Givi, Mohammad Kazem Besharati
Jafari, Jalal
[J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2014, 23 (01) : 101 - 107
[16] Production of Cu/SiC Nanocomposite Layers by Friction Stir Processing
Barmouz, Mohsen
Givi, Mohammadkazem Besharati
Asadi, Parviz
[J]. DIFFUSION IN SOLIDS AND LIQUIDS VI, PTS 1 AND 2, 2011, 312-315 : 319 - 324
[17] Fabrication of in situ Cu/SiC composites using multi-pass friction stir processing: Evaluation of microstructural, porosity, mechanical and electrical behavior
Barmouz, Mohsen
Givi, Mohammad Kazem Besharati
[J]. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2011, 42 (10) : 1445 - 1453
[18] On the role of processing parameters in producing Cu/SiC metal matrix composites via friction stir processing: Investigating microstructure, microhardness, wear and tensile behavior
Barmouz, Mohsen
Givi, Mohammad Kazem Besharati
Seyfi, Javad
[J]. MATERIALS CHARACTERIZATION, 2011, 62 (01) : 108 - 117
[19] Planar Twist Extrusion versus Twist Extrusion
Beygelzimer, Y.
Prilepo, D.
Kulagin, R.
Grishaev, V.
Abramova, O.
Varyukhin, V.
Kulakov, M.
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2011, 211 (03) : 522 - 529
[20] Microstructure and texture evolutions and mechanical properties in pure copper by equal-channel angular pressing
Bian, M. Z.
Li, Y. L.
Mathesh, M.
Abreu, D.
Nam, N. D.
[J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 578 : 369 - 372

← 1 2 3 4 5 6 7 8 9 10 →