Twenty-year uninterrupted endeavor of friction stir processing by focusing on copper and its alloys

被引：73
作者：
Ebrahimi, M. [1 ]
Par, M. A. [1 ]
机构：
[1] Univ Maragheh, Dept Mech Engn, Fac Engn, Maragheh, Iran
来源：
JOURNAL OF ALLOYS AND COMPOUNDS | 2019年 / 781卷
关键词：
Friction stir processing; Copper alloys; Mechanical properties; Microstructural analysis; SEVERE PLASTIC-DEFORMATION; MECHANICAL-PROPERTIES; PURE COPPER; REINFORCED COPPER; WEAR BEHAVIOR; SUPERPLASTIC DEFORMATION; ROTATIONAL SPEED; GRAIN-REFINEMENT; HEAT INPUT; MICROSTRUCTURE;
D O I：
10.1016/j.jallcom.2018.12.083
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
This work reviews friction stir processing (FSP), which is a prominent severe plastic deformation technique used to improve materials behaviors through grain refinement. Scientists have concentrated on this technique because it is the only strengthening mechanism providing superior properties of metals and alloys without sacrificing their toughness. It was found that the aforementioned technique has the capability to provide superior properties for single-phase and multiphase materials and even for the metal matrix composites. This study has been mainly restricted to review the FSP treatment of copper and its alloys because of their vast and valuable applications. (C) 2018 Elsevier B.V. All rights reserved.
引用
收藏
页码：1074 / 1090
页数：17
相关论文
共 121 条
  • [1] Microstructure and mechanical properties of Cu/SiC metal matrix composite fabricated via friction stir processing
    Akramifard, H. R.
    Shamanian, M.
    Sabbaghian, M.
    Esmailzadeh, M.
    [J]. MATERIALS & DESIGN, 2014, 54 : 838 - 844
  • [2] Superplastic behaviour of AZ91 magnesium alloy processed by high-pressure torsion
    Al-Zubaydi, Ahmed S. J.
    Zhilyaev, Alexander P.
    Wang, Shun C.
    Reed, Philippa A. S.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 637 : 1 - 11
  • [3] Direct influence of recovery behaviour on mechanical properties in oxygen-free copper processed using different SPD techniques: HPT and ECAP
    Alawadhi, Meshal Y.
    Sabbaghianrad, Shima
    Huang, Yi
    Langdon, Terence. G.
    [J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2017, 6 (04): : 369 - 377
  • [4] [Anonymous], 2013, WORLD APPL SCI J
  • [5] Wear behaviour of a Mg alloy subjected to friction stir processing
    Arora, H. S.
    Singh, H.
    Dhindaw, B. K.
    [J]. WEAR, 2013, 303 (1-2) : 65 - 77
  • [6] Arulmoni V. J., 2015, NANOTUBES, V3, P189
  • [7] Microstructure, texture and mechanical properties of aluminum processed by high-pressure tube twisting
    Arzaghi, M.
    Fundenberger, J. J.
    Toth, L. S.
    Arruffat, R.
    Faure, L.
    Beausir, B.
    Sauvage, X.
    [J]. ACTA MATERIALIA, 2012, 60 (11) : 4393 - 4408
  • [8] Characterization of oxide dispersion strengthened copper based materials developed by friction stir processing
    Avettand-Fenoel, M. -N.
    Simar, A.
    Shabadi, R.
    Taillard, R.
    de Meester, B.
    [J]. MATERIALS & DESIGN, 2014, 60 : 343 - 357
  • [9] Severe plastic deformation (SPD) processes for metals
    Azushima, A.
    Kopp, R.
    Korhonen, A.
    Yang, D. Y.
    Micari, F.
    Lahoti, G. D.
    Groche, P.
    Yanagimoto, J.
    Tsuji, N.
    Rosochowski, A.
    Yanagida, A.
    [J]. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2008, 57 (02) : 716 - 735
  • [10] Nanostructured pure copper fabricated by simple shear extrusion (SSE): A correlation between microstructure and tensile properties
    Bagherpour, E.
    Qods, F.
    Ebrahimi, R.
    Miyamoto, H.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 679 : 465 - 475
12345678910