Preparation and electrochemical properties of LiFePO4/C composite with network structure for lithium ion batteries

The bare LiFePO4 and LiFePO4/C Composites with network structure were prepared by solid-state reaction. The crystalline structures, morphologies and specific surface areas of the materials were investigated by X-ray diffractometry(XRD), scanning electron microscopy(SEM) and multi-point brunauer emmett and teller(BET) method. The results show that the LiFePO4/C composite with the best network structure is obtained by adding 10% phenolic resin carbon. Its electronic conductivity increases to 2.86 X 10(-2) S/cm. It possesses the highest specific surface area of 115.65 m(2)/g, which exhibits the highest discharge specific capacity of 164.33 mA center dot h/g at C/10 rate and 149.12 mA center dot h/g at I C rate. The discharge capacity is completely recovered when C/10 rate is applied again.