Characteristic Analysis and Temperature Rise Calculation of PMSM Under Different Power Supply Modes

被引:10
|
作者
Lian, Guangkun [1 ]
Li, Huitao [1 ]
Chen, Biao [1 ]
Ban, Fei [1 ,2 ]
Zhang, Jiahe [1 ,2 ]
机构
[1] Chinese Acad Sci, Inst Elect Engn, Beijing 100190, Peoples R China
[2] Univ Chinese Acad Sci, Beijing 100049, Peoples R China
关键词
Co-simulation; sine wave power supply; inverter power supply; temperature rise;
D O I
10.1109/TASC.2019.2891534
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
In the servo system, the performance of the permanent magnet synchronous motor (PMSM) is affected by the controller. Based on the software interface technology, this paper establishes a cosimulation system of PMSM finite element model and control system, and compares the operating characteristics of the motor under sine wave power supply and inverter power supply. On this basis, the loss and temperature rise of the motor under two power supply modes are calculated. Finally, the temperature rise simulation results are compared with the prototype measurements. The results show that the temperature rise calculation result of the motor when the inverter is powered in the simulation model is very close to the measured result of the prototype.
引用
收藏
页数:5
相关论文
共 50 条
  • [31] Characteristic analysis of high voltage power supply for electrostatic precipitation
    Chao, Zeyun
    Xu, Zhixin
    Zhong, Heqing
    Kang, Yong
    Gaodianya Jishu/High Voltage Engineering, 2006, 32 (02): : 81 - 83
  • [32] Material characteristic analysis and different load performances calculation of IMCCR
    Cao Junci
    Li Weili
    Cheng Shukang
    Zhang Xiaochen
    2007 IEEE INTERNATIONAL SYMPOSIUM ON INDUSTRIAL ELECTRONICS, PROCEEDINGS, VOLS 1-8, 2007, : 1248 - +
  • [33] Calculation of Resonant Modes for Power Supply Systems and Development of Measures on Higher Harmonics Filtering
    Kovalenko, D., V
    Kisselyov, B. Yu
    Ivanova, E., V
    2018 INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING, APPLICATIONS AND MANUFACTURING (ICIEAM), 2018,
  • [34] Calculation of resonant modes for power supply systems and development of measures on higher harmonics filtering
    Osipov, D. S.
    Kovalenko, D., V
    Eremin, E. N.
    Sidorov, O. A.
    Bigun, A. Ya
    MECHANICAL SCIENCE AND TECHNOLOGY UPDATE (MSTU 2019), 2019, 1260
  • [35] Temperature Rise in Resin Composite Samples Polymerised with Different Curing Modes of LEDs
    Knezevic, Alena
    Tarle, Zrinka
    Pichler, Goran
    Ban, Ticijana
    Mandic, Visnja Negovetic
    CHINESE JOURNAL OF DENTAL RESEARCH, 2008, 11 (02): : 125 - 129
  • [36] Decision Analysis of Online Shopping Service Supply Chain Under Different Bargaining Power
    Qu Shengnan
    PROCEEDINGS OF 2018 CHINA MARKETING INTERNATIONAL CONFERENCE: SMART MARKETING: HUMAN, TECHNOLOGY AND INNOVATION, 2018, : 126 - 148
  • [37] Dynamic characteristic analysis of SCO2 Brayton cycle under different turbine back pressure modes
    Zhao, Quanbin
    Xu, Jiayuan
    Hou, Min
    Chong, Daotong
    Wang, Jinshi
    Chen, Weixiong
    ENERGY, 2024, 293
  • [38] The temperature rise characteristic analysis technique of the traction motor for EV application
    Kim, Wan-Gi
    Lee, Jong-In
    Kim, Keun-Woong
    Kim, Yoo-Sung
    Lee, Choong-Dong
    IFOST 2006: 1st International Forum on Strategic Technology, Proceedings: E-VEHICLE TECHNOLOGY, 2006, : 443 - 446
  • [39] Characteristic Analysis of Primary Frequency Modulation in Power System under Different Types of Active Disturbance
    Shen, Ye
    Wang, Jingbo
    Zhou, Peng
    Yang, Hongzhi
    Gu, Wei
    Yin, Minghui
    2018 2ND IEEE CONFERENCE ON ENERGY INTERNET AND ENERGY SYSTEM INTEGRATION (EI2), 2018,
  • [40] Simulated calculation of temperature rise in silicon material irradiated by high power laser
    Shen, ZH
    Lu, JA
    Ni, XW
    LASER PROCESSING OF MATERIALS AND INDUSTRIAL APPLICATIONS, 1996, 2888 : 271 - 275