Effect of boron nitride and zirconium dioxide on mechanical behavior of Al7075 metal matrix hybrid composite

被引:22
作者
Kuldeep, B. [1 ]
Ravikumar, K. P. [2 ]
Pradeep, S. [1 ]
Gopi, K. R. [3 ]
机构
[1] VTU, Malnad Coll Engn, Dept Mech Engn, Hassan 573202, Karnataka, India
[2] VTU, Malnad Coll Engn, Dept Automobile Engn, Hassan 573202, Karnataka, India
[3] VTU, Rajeev Inst Technol, Dept Mech Engn, Hassan 573201, Karnataka, India
关键词
aluminium; microstructure; composites; metal matrix composite; ALUMINUM-MATRIX; TRIBOLOGICAL PROPERTIES; WEAR BEHAVIOR; MICROSTRUCTURE; GRAPHITE; AL2O3; CARBIDE; TENSILE; MICRO;
D O I
10.1088/2053-1591/aaf36b
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Aluminium is the most promising materials owing to its strength to weight ratio with good oxidation resistance. The present work is intended on synthesis and study on hardness, wear resistance and tensile strength of hexagonal boron nitride and zirconium dioxide reinforced Al7075 metal matrix hybrid composite. The produced composite showed increased hardness of 92.6 BHN due to the presence of uniformly distributed reinforcements within the matrix. The hybrid combination of boron nitride (3%) with zirconium dioxide (6%) showed higher tensile strength of 187.585 MPa and significant improvement in wear resistance was achieved as compared to unreinforced alloy. Increase in wear resistance is due to existence of hard reinforcements which restricted the loss of material from sample surface.
引用
收藏
页数:10
相关论文
共 50 条
  • [31] Investigation on Mechanical Behavior of Hot Rolled Al7075-TiB2 In-situ Metal Matrix Composite
    Gajakosh, Amith Kumar
    Keshavamurthy, R.
    Ugrasen, G.
    Adarsh, H.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2018, 5 (11) : 25605 - 25614
  • [32] High Temperature Mechanical Properties and Wear Performance of B4C/Al7075 Metal Matrix Composites
    Shin, Sangmin
    Lee, Donghyun
    Lee, Yeong-Hwan
    Ko, Seongmin
    Park, Hyeonjae
    Lee, Sang-Bok
    Cho, Seungchan
    Kim, Yangdo
    Lee, Sang-Kwan
    Jo, Ilguk
    [J]. METALS, 2019, 9 (10)
  • [33] Wear and Corrosion Behavior of Al7075 Matrix Hybrid Composites Produced by Friction Stir Processing: Optimization of Process Parameters
    Maji, Pabitra
    Nath, Rahul Kanti
    Karmakar, Ranit
    Madapana, Dileep
    Meitei, R. K. Bhogendro
    Ghosh, Subrata Kumar
    [J]. JOM, 2021, 73 (12) : 4397 - 4409
  • [34] An Experimental Investigation on Effect of B4C/CeO2 Reinforcements on Mechanical, Fracture Surface and Wear Characteristics in Al7075 Hybrid Metal Matrix Composites
    Ravikumar, M.
    Gowda, Hanumanthe
    Umesh, G. L.
    Raghavendra, S.
    Darshan, S. M.
    Shivakumar, M. M.
    Somashekar, Santhosh
    [J]. INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 2024, 16 (05): : 100 - 113
  • [35] Mechanical Fractography and Worn Surface Analysis of Nanographite and ZrO2-Reinforced Al7075 Alloy Aerospace Metal Composites
    Kumar, Raj
    Deshpande, R. G.
    Gopinath, B.
    Harti, Jayasheel
    Nagaral, Madeva
    Auradi, V.
    [J]. JOURNAL OF FAILURE ANALYSIS AND PREVENTION, 2021, 21 (02) : 525 - 536
  • [36] A STUDY OF MECHANICAL AND WEAR BEHAVIOR OF SIC-CEO2 REINFORCED AL7075 HOT ROLLED HYBRID COMPOSITES
    Ravikumar, M.
    Naik, R.
    Suresh, R.
    Chethana, K. Y.
    [J]. ARCHIVES OF METALLURGY AND MATERIALS, 2024, 69 (03) : 903 - 910
  • [37] Effect of addition of titanium carbide and graphite reinforcement on Al7075 hybrid metal matrix composites by gravity stir casting method
    Srinivasan, R.
    Hariharan, K.
    Jeyanthan, S. A.
    Kamalesh, M.
    Ali, Ifthikar
    [J]. MATERIALS TODAY-PROCEEDINGS, 2022, 62 : 86 - 93
  • [38] Effect of addition of titanium carbide and graphite reinforcement on Al7075 hybrid metal matrix composites by gravity stir casting method
    Srinivasan, R.
    Hariharan, K.
    Jeyanthan, S. A.
    Kamalesh, M.
    Ali, Ifthikar
    [J]. MATERIALS TODAY-PROCEEDINGS, 2022, 62 : 86 - 93
  • [39] Experimental investigation of Al7075 reinforced with WC and SiC metal matrix composites
    Moorthy, A. Anandha
    Jegan, M. M.
    Kanna, G. Prakash
    Senthilkumar, C.
    Beemaraj, Radha Krishnan
    [J]. MATERIALS TODAY-PROCEEDINGS, 2022, 60 : 1358 - 1361
  • [40] Tribological behavior of boron nitride nanoplatelet reinforced Ni3Al intermetallic matrix composite fabricated by selective laser melting
    Song, Ying
    He, Guangyu
    Wang, Yongguang
    Chen, Yao
    [J]. MATERIALS & DESIGN, 2019, 165