Macro strain-stress determination in a high pressure rotational anvil apparatus

被引:1
作者
Lin, Lin [1 ]
Ji, Cheng [1 ]
Ma, Yanzhang [1 ]
机构
[1] Texas Tech Univ, Dept Mech Engn, Lubbock, TX 79409 USA
关键词
X-RAY-DIFFRACTION; DEFORMATION; TEMPERATURE; CELL;
D O I
10.1063/5.0075090
中图分类号
O59 [应用物理学];
学科分类号
摘要
With the increasing development of techniques that utilize high-pressure shear in multiple fields, constructing a proper interpretation of strain and stress in rotational anvil apparatuses is becoming more and more urgent. A macro strain analysis in a rotational anvil apparatus that generates high pressure and shear was performed based on a polycrystal strain spatial distribution. Based on the strain, macro stress components were retrieved. Three analytical methods suitable for various application purposes are presented that can be used to conduct stress/strain analysis of a sample under pressure and shear: a sample center fitting method that obtains macro strain components from the refinement of d-spacing azimuth angle distribution, a six-point graphical method that calculates macro strain components from graphical strain distribution, and a four-point graphical method that determines the components directly from a diffraction image. This study also discusses and verifies the validity of and comparison between the methods through experimental data. The present work is expected to provide a foundation for further experimental studies of shear at pressures and expand the field of high-pressure sciences.
引用
收藏
页数:8
相关论文
共 39 条
  • [1] Frictional properties of the active San Andreas Fault at SAFOD: Implications for fault strength and slip behavior
    Carpenter, B. M.
    Saffer, D. M.
    Marone, C.
    [J]. JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH, 2015, 120 (07) : 5273 - 5289
  • [2] Exploring nanomechanics with high-pressure techniques
    Chen, Bin
    [J]. MATTER AND RADIATION AT EXTREMES, 2020, 5 (06)
  • [3] Mechanochemical induced structural changes in sucrose using the rotational diamond anvil cell
    Ciezak-Jenkins, Jennifer A.
    Jenkins, Timothy A.
    [J]. JOURNAL OF APPLIED PHYSICS, 2018, 123 (08)
  • [4] Conventional superconductivity at 203 kelvin at high pressures in the sulfur hydride system
    Drozdov, A. P.
    Eremets, M. I.
    Troyan, I. A.
    Ksenofontov, V.
    Shylin, S. I.
    [J]. NATURE, 2015, 525 (7567) : 73 - +
  • [5] Drozdov A.P., 2018, ARXIV180807039
  • [6] Drozdov A. P., 2018, ARXIV181201561
  • [7] Large elastoplastic deformation of a sample under compression and torsion in a rotational diamond anvil cell under megabar pressures
    Feng, Biao
    Levitas, Valery I.
    [J]. INTERNATIONAL JOURNAL OF PLASTICITY, 2017, 92 : 79 - 95
  • [8] A cubic boron nitride gasket for diamond-anvil experiments
    Funamori, Nobumasa
    Sato, Tomoko
    [J]. REVIEW OF SCIENTIFIC INSTRUMENTS, 2008, 79 (05)
  • [9] Shear-Driven Chemical Decomposition of Boron Carbide
    Gao, Yang
    Ma, Yanzhang
    [J]. JOURNAL OF PHYSICAL CHEMISTRY C, 2019, 123 (37) : 23145 - 23150
  • [10] Shear driven formation of nano-diamonds at sub-gigapascals and 300 K
    Gao, Yang
    Ma, Yanzhang
    An, Qi
    Levitas, Valery
    Zhang, Yanyan
    Feng, Biao
    Chaudhuri, Jharna
    Goddard, William A., III
    [J]. CARBON, 2019, 146 : 364 - 368