Effects of transmission mechanical characteristics on the choice of a motor-reducer

被引：84
作者：
Giberti, H. [1 ]
Cinquemani, S. [1 ]
Legnani, G. [2 ]
机构：
[1] Politecn Milan, Dipartimento Meccan, I-20156 Milan, Italy
[2] Univ Brescia, Dipartimento Ingn Meccan & Ind, I-25129 Brescia, Italy
来源：
MECHATRONICS | 2010年 / 20卷 / 05期
关键词：
Electrical servo-motor; Optimal transmission ratio; Motor and reducer pairing; Transmission mechanical efficiency; MECHATRONIC APPLICATIONS; SELECTION; OPTIMIZATION;
D O I：
10.1016/j.mechatronics.2010.06.006
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
This paper addresses the effects of the mechanical efficiency and inertia of the transmission on the motor-load coupling. Relationships between the elements of a generic machine are studied by using parameters describing the performance of the motor, the power demand of the system and the influence of mechanical characteristics on the motor-transmission coupling A knowledge of these reciprocal influences is use critically to analyse the methods used to select motor-reducer units and to identify the boundary conditions of the problem Guidelines for a correct choice of motor and gearbox are suggested: the theoretical discussion is illustrated with graphs that can assess the influence of motor and transmission features on the performance of the machine and suggest to the designer all possible pairings. (C) 2010 Elsevier Ltd All rights reserved.
引用
收藏
页码：604 / 610
页数：7
相关论文
共 9 条
[1]  
CHEN DZ, 1991, 1991 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION, VOLS 1-3, P1282, DOI 10.1109/ROBOT.1991.131788
[2]   A procedure for a suitable selection of laws of motion and electric drive systems under inertial loads [J].
Cusimano, G .
MECHANISM AND MACHINE THEORY, 2003, 38 (06) :519-533
[3]   Optimization of the choice of the system electric drive-device-transmission for mechatronic applications [J].
Cusimano, Giancarlo .
MECHANISM AND MACHINE THEORY, 2007, 42 (01) :48-65
[4]  
Legnani G., 2002, MECCANICA AZIONAMENT
[5]  
Pasch K.A., 1984, T ASME, V106, P102
[6]   Optimal selection of motor and gearhead in mechatronic applications [J].
Roos, F ;
Johansson, H ;
Wikander, J .
MECHATRONICS, 2006, 16 (01) :63-72
[7]   An efficient procedure for checking performance limits in servo drive selection and optimization [J].
Van de Straete, HJ ;
De Schutter, J ;
Belmans, R .
IEEE-ASME TRANSACTIONS ON MECHATRONICS, 1999, 4 (04) :378-386
[8]   Servo motor selection criterion for mechatronic applications [J].
Van de Straete, HJ ;
Degezelle, P ;
De Schutter, J ;
Belmans, RJM .
IEEE-ASME TRANSACTIONS ON MECHATRONICS, 1998, 3 (01) :43-50
[9]  
Van de Straete HJ, 1999, T ASME, V121, P544
1