Experimental research of optimization methodology for local, resistive - heating of thin molybdenum plates

被引:4
作者
Frivaldsky, M. [2 ]
Donic, T. [1 ]
Vavrus, V. [2 ]
Pavelek, M. [2 ]
机构
[1] Univ Zilina, Fac Mech Engn, Zilina, Slovakia
[2] Univ Zilina, Fac Elect Engn, Zilina, Slovakia
关键词
Molybdenum sheet; Local resistance heating; SW Comsol; Thermovision; RESISTANCE; SHEETS; MODEL;
D O I
10.1016/j.ijthermalsci.2017.07.009
中图分类号
O414.1 [热力学];
学科分类号
摘要
Because of the unique mechanical and chemical behavior of molybdenum and its alloys, they become one of the most advanced materials for high-temperature heating elements, the most exposed areas of furnace, the aircraft industry and the components of the crystallization apparatus at sapphire single crystal growth. This paper presents unique design an experimental system, which shall be in future optimized through simulation model, for comprehensive analysis of important parameters of resistance heating of pure molybdenum sheet with the thickness of 0,5 mm. The specific details of the shape, size and spatial distribution of the heating electrodes based on copper and graphite are investigated. Technical solutions for generation of contact pressures as well as the mechanism for moving the sheet through the zone of thermal exposure is described in detail. Details of the control of power components of the experimental system are shown schematically in the paper. Numerical simulation of resistance heating are provided in Comsol SW, which gives optimal support for experimental analysis at different conditions of electric current and voltage exposure for resistive contacts made of copper, graphite, and combination of those two materials. Further optimization is done in the way of shape and location modification of the contact electrodes, modification of the specific contact pressure-lowering contact resistance, and modification of time of stress, exposure and also the distribution of temperature fields in the exposed zones of molybdenum samples. Presented are also experimental thermal characteristics of the heated volumes of molybdenum metal after the end of the heating-response to thermal exposure using a thermal image technology. (C) 2017 Elsevier Masson SAS. All rights reserved.
引用
收藏
页码:111 / 123
页数:13
相关论文
共 20 条
  • [1] Forced convection heat transfer from banks of helical coiled resistance wires
    Comini, G.
    Savino, S.
    Bari, E.
    Bison, A.
    [J]. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2008, 47 (04) : 442 - 449
  • [2] A Translational Coupled Electromagnetic and Thermal Innovative Model for Induction Welding of Tubes
    Dughiero, Fabrizio
    Forzan, Michele
    Pozza, Cristian
    Sieni, Elisabetta
    [J]. IEEE TRANSACTIONS ON MAGNETICS, 2012, 48 (02) : 483 - 486
  • [3] Hatakeyama K, 2014, 2014 IEEE 27TH INTERNATIONAL CONFERENCE ON MICRO ELECTRO MECHANICAL SYSTEMS (MEMS), P1111, DOI 10.1109/MEMSYS.2014.6765840
  • [4] Determination of Critical Thermal Operation for Small Squirrel Cage Motor
    Hruska, Karel
    Kindl, Vladimir
    Pechanek, Roman
    Skala, Bohumil
    [J]. IECON 2014 - 40TH ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY, 2014, : 502 - 507
  • [5] Hard-coupled model of local direct resistance heating of thin sheets
    Karban, Pavel
    Mach, Frantisek
    Dolezel, Ivo
    [J]. JOURNAL OF COMPUTATIONAL AND APPLIED MATHEMATICS, 2012, 236 (18) : 4725 - 4731
  • [6] A review on hot stamping
    Karbasian, H.
    Tekkaya, A. E.
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2010, 210 (15) : 2103 - 2118
  • [7] Kindl V, 2014, PROCEEDINGS OF THE 2014 16TH INTERNATIONAL CONFERENCE ON MECHATRONICS (MECHATRONIKA 2014), P463, DOI 10.1109/MECHATRONIKA.2014.7018303
  • [8] Induction Heating Technology and Its Applications: Past Developments, Current Technology, and Future Challenges
    Lucia, Oscar
    Maussion, Pascal
    Dede, Enrique J.
    Burdio, Jose M.
    [J]. IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2014, 61 (05) : 2509 - 2520
  • [9] Application of resistance heating technique to mushy state forming of aluminium alloy
    Maki, S
    Harada, Y
    Mori, K
    Makino, H
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 125 : 477 - 482
  • [10] Warm and hot stamping of ultra high tensile strength steel sheets using resistance heating
    Mori, K
    Maki, S
    Tanaka, Y
    [J]. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2005, 54 (01) : 209 - 212