Dip-coating of boron nitride interphase and its effects on mechanical properties of SiCf/SiC composites

被引：39

作者：

Ding, Donghai ^{[1
]}

Zhou, Wancheng ^{[1
]}

Luo, Fa ^{[1
]}

Chen, Malin ^{[1
]}

Zhu, Dongmei ^{[1
]}

机构：

[1] Northwestern Polytech Univ, State Key Lab Solidificat Proc, Xian 710072, Shaanxi, Peoples R China

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2012年 / 543卷

关键词：

Mechanical characterization; X-ray diffraction; Ceramics; Composites; SIC-MATRIX COMPOSITES; CARBON-FIBERS; CARBOTHERMAL SYNTHESIS; OXIDATION MECHANISMS; TEMPERATURES; DEGRADATION; DEPOSITION; KINETICS; DESIGN;

D O I：

10.1016/j.msea.2012.01.118

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Boron nitride (BN) coatings were successfully synthesized on KD-1 SiC fibers by dip-coating in boric acid and urea solution followed by heat treatment at 1000 degrees C in nitrogen. The SEM micrographs indicated that the BN coating is smooth. The XRD and Raman spectrum results showed that the composition of the coatings is h-BN. The effects of BN interphase on the mechanical properties of 2.5D SiC fiber reinforced CVI-SiC matrix (SiC/SiC) composites were investigated. The results show that the flexural strength of SiCf/SiC composites with and without BN interphase is 170 MPa and 60 MPa, respectively. And, compared to composites without interphase, the SiCf/SiC composites with BN interphase exhibit an obvious toughened fracture behavior. It is indicated that dip-coating BN interphase can effectively adjust the interfacial bonding strength and improve the mechanical properties of SiCf/SiC composites. (C) 2012 Published by Elsevier B.V.

引用

页码：1 / 5

页数：5

共 50 条

[41] Thermo-mechanical coupling failure mechanisms of reusable SiCf/SiC composites with PyC interphase
Xu, Peifei
Zhang, Hongyu
Jin, Enze
Tan, Zhiyong
Zhang, Peiwei
Li, Yanbin
Zhang, Dahai
Fei, Qingguo
INTERNATIONAL JOURNAL OF FATIGUE, 2024, 189
[42] Effects of the single layer CVD SiC interphases on the mechanical properties of the SiCf/SiC composites fabricated by PIP process
Liu, Haitao
Cheng, Haifeng
Wang, Jun
Tang, Gengping
CERAMICS INTERNATIONAL, 2010, 36 (07) : 2033 - 2037
[43] Mechanical behavior of SiCf reinforced SiC composites with fiber coating - Stress alleviation in SiC fiber by soft coating layer
Jang, Kyuug Soon
Lee, Eugene
Kim, Tae Woo
Han, In Sub
Woo, Sang Kuk
Lee, Kee Sung
JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2009, 117 (1365) : 582 - 587
[44] Improving the mechanical properties of clay/polymer aerogels by a simple dip-coating procedure
Johnson, J. R., III
Schiraldi, D. A.
JOURNAL OF APPLIED POLYMER SCIENCE, 2012, 126 (06) : 2004 - 2009
[45] Effects of Hot Pressing Condition on the Properties of SiCf/SiC Composites
Noviyanto, Alfian
Yoon, Dang-Hyok
JOURNAL OF THE KOREAN CERAMIC SOCIETY, 2011, 48 (05) : 335 - 341
[46] Effects of heat treatment on mechanical and thermophysical properties of KD-SA SiCf/SiC composites
Zhang, Jin
Wang, Yanfei
Chen, Xiangjian
Gou, Yanzi
Li, Duan
Liu, Rongjun
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2025, 108 (06)
[47] Effect of preform structure on mechanical and thermal properties of SiCf/SiC composites
Wang, Xu-hui
Wu, Zong-xu
Chen, Zhao-ke
Wu, Yan
Xiong, Xiang
JOURNAL OF CENTRAL SOUTH UNIVERSITY, 2024, 31 (01) : 101 - 113
[48] Fabrication and mechanical properties of SiCf/SiC composites via polycarbosilane pyrolysis
Wang, Yi-Fei
Ma, Qing-Song
Mu, Jing-Yang
Wang, Jun
HIGH-PERFORMANCE CERAMICS IV, PTS 1-3, 2007, 336-338 : 1254 - 1256
[49] Effects of heat treatment on mechanical and thermophysical properties of KD-SA SiCf/SiC composites
Wang, Yanfei (wangyanfei@nudt.edu.cn); Liu, Rongjun (rongjunliu@nudt.edu.cn), 2025, John Wiley and Sons Inc
[50] Effect of SiC interphase on the mechanical, high-temperature dielectric and high-temperature microwave absorption properties of the SiCf/SiC/Mu composites
Gao, Hui
Luo, Fa
CERAMICS INTERNATIONAL, 2022, 48 (13) : 18567 - 18578

← 1 2 3 4 5 →