Dip-coating of boron nitride interphase and its effects on mechanical properties of SiCf/SiC composites

被引：41

作者：

Ding, Donghai ^{[1
]}

Zhou, Wancheng ^{[1
]}

Luo, Fa ^{[1
]}

Chen, Malin ^{[1
]}

Zhu, Dongmei ^{[1
]}

机构：

[1] Northwestern Polytech Univ, State Key Lab Solidificat Proc, Xian 710072, Shaanxi, Peoples R China

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2012年 / 543卷

关键词：

Mechanical characterization; X-ray diffraction; Ceramics; Composites; SIC-MATRIX COMPOSITES; CARBON-FIBERS; CARBOTHERMAL SYNTHESIS; OXIDATION MECHANISMS; TEMPERATURES; DEGRADATION; DEPOSITION; KINETICS; DESIGN;

D O I：

10.1016/j.msea.2012.01.118

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Boron nitride (BN) coatings were successfully synthesized on KD-1 SiC fibers by dip-coating in boric acid and urea solution followed by heat treatment at 1000 degrees C in nitrogen. The SEM micrographs indicated that the BN coating is smooth. The XRD and Raman spectrum results showed that the composition of the coatings is h-BN. The effects of BN interphase on the mechanical properties of 2.5D SiC fiber reinforced CVI-SiC matrix (SiC/SiC) composites were investigated. The results show that the flexural strength of SiCf/SiC composites with and without BN interphase is 170 MPa and 60 MPa, respectively. And, compared to composites without interphase, the SiCf/SiC composites with BN interphase exhibit an obvious toughened fracture behavior. It is indicated that dip-coating BN interphase can effectively adjust the interfacial bonding strength and improve the mechanical properties of SiCf/SiC composites. (C) 2012 Published by Elsevier B.V.

引用

页码：1 / 5

页数：5

共 25 条

[1] Synthesis of boron nitride coating on carbon nanotubes [J].

Chen, LL ;

Ye, HH ;

Gogotsi, Y .

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2004, 87 (01) :147-151

[2] Carbothermal synthesis of boron nitride coatings on silicon carbide [J].

Chen, LL ;

Ye, HH ;

Gogotsi, Y ;

McNallan, MJ .

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2003, 86 (11) :1830-1837

[3] BN coatings prepared by low pressure chemical vapor deposition using boron trichloride-ammonia-hydrogen-argon mixture gases [J].

Cheng, Yu ;

Yin, Xiaowei ;

Liu, Yongsheng ;

Li, Siwei ;

Cheng, Laifei ;

Zhang, Litong .

SURFACE & COATINGS TECHNOLOGY, 2010, 204 (16-17) :2797-2802

[4] Effect of activation on boron nitride coating on carbon fiber [J].

Das, M. ;

Ghosh, J. ;

Basu, A. K. .

CERAMICS INTERNATIONAL, 2010, 36 (08) :2511-2514

[5] Carbothermal synthesis of boron nitride coating on PAN carbon fiber [J].

Das, M. ;

Basu, A. K. ;

Ghatak, S. ;

Joshi, Amish G. .

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2009, 29 (10) :2129-2134

[6] OXIDATION MECHANISMS AND KINETICS OF 1D-SIC/C/SIC COMPOSITE-MATERIALS .1. AN EXPERIMENTAL APPROACH [J].

FILIPUZZI, L ;

CAMUS, G ;

NASLAIN, R ;

THEBAULT, J .

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1994, 77 (02) :459-466

[7] Urea route to coat inorganic nanowires, carbon fibers and nanotubes by boron nitride [J].

Gomathi, A. ;

Harika, M. Ramya ;

Rao, C. N. R. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 476 (1-2) :29-33

[8] Tensile fracture behavior of continuous SiC fiber-reinforced SiC matrix composites at elevated temperatures and correlation to in situ constituent properties [J].

Guo, SQ ;

Kagawa, Y .

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2002, 22 (13) :2349-2356

[9]

Kerans RJ, 2002, J AM CERAM SOC, V85, P2599, DOI 10.1111/j.1151-2916.2002.tb00505.x

[10] Formation of BN films on carbon fibers by dip-coating [J].

Lii, DF ;

Huang, JL ;

Tsui, LJ ;

Lee, SM .

SURFACE & COATINGS TECHNOLOGY, 2002, 150 (2-3) :269-276

← 1 2 3 →