Axial Flux PM Machines With Concentrated Armature Windings: Design Analysis and Test Validation of Wind Energy Generators

被引：117

作者：

Di Gerlando, Antonino ^{[1
]}

Foglia, Gianmaria ^{[1
]}

Iacchetti, Matteo Felice ^{[1
]}

Perini, Roberto ^{[1
]}

机构：

[1] Politecn Milan, Dept Elect Engn, I-20133 Milan, Italy

来源：

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS | 2011年 / 58卷 / 09期

关键词：

Design methodology; direct drive; generators; permanent magnet machines; wind power generation; PERMANENT-MAGNET MACHINES; SYNCHRONOUS MACHINES; MODULAR DESIGN; THERMAL MODELS; MOTORS;

D O I：

10.1109/TIE.2010.2081956

中图分类号：

TP [自动化技术、计算机技术];

学科分类号：

0812 ;

摘要：

Some design and operation aspects of axial flux permanent magnet synchronous machines, wound with concentrated coils, are presented. Due to their high number of poles, compactness, and excellent waveform quality and efficiency, these machines show satisfactory operation at low speeds, both as direct drive generators and as motors. In this paper, after a general analysis of the model and design features of this kind of machine, the attention is focused on wind power generation: The main sizing equations are defined, and the most relevant figures of merit are examined by means of a suitable parametric analysis. Some experimental results obtained by testing a three-phase, 50-kW, and 70-rpm prototype are presented and discussed, validating the modeling theory and the design procedure.

引用

页码：3795 / 3805

页数：11

共 31 条

[1] Design, Analysis, and Control of a Hybrid Field-Controlled Axial-Flux Permanent-Magnet Motor [J].

Aydin, Metin ;

Huang, Surong ;

Lipo, Thomas A. .

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2010, 57 (01) :78-87

[2]

BIANCHI N, 2008, IEEE T IND APPL, V44, P1521

[3] Determination of critical parameters in electrical machine thermal models [J].

Boglietti, Aldo ;

Cavagnino, Andrea ;

Staton, David .

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2008, 44 (04) :1150-1159

[4] Evolution and Modern Approaches for Thermal Analysis of Electrical Machines [J].

Boglietti, Aldo ;

Cavagnino, Andrea ;

Staton, David ;

Shanel, Martin ;

Mueller, Markus ;

Mejuto, Carlos .

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2009, 56 (03) :871-882

[5] Design and optimization of a nine-phase axial-flux PM synchronous generator with concentrated winding for direct-drive wind turbine [J].

Brisset, Stephane ;

Vizireanu, Darius ;

Brochet, Pascal .

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2008, 44 (03) :707-715

[6] A comparison between the axial flux and the radial flux structures for PM synchronous motors [J].

Cavagnino, A ;

Lazzari, M ;

Profumo, F ;

Tenconi, A .

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2002, 38 (06) :1517-1524

[7] Synthesis of high performance PM motors with concentrated windings [J].

Cros, M ;

Viarouge, P .

IEEE TRANSACTIONS ON ENERGY CONVERSION, 2002, 17 (02) :248-253

[8] Preliminary evaluation of a megawatt-class low-speed axial flux PMSM with self-magnetization function of the armature coils [J].

Curiac, Paul ;

Kang, Do Hyun .

IEEE TRANSACTIONS ON ENERGY CONVERSION, 2007, 22 (03) :621-628

[9] Permanent magnet synchronous machines with concentrated coil armature windings: analysis and test validation of single stator-double rotor, axial flux machines [J].

Di Gerlando, A. ;

Foglia, G. M. ;

Perini, R. ;

Ubaldini, M. .

ELECTRICAL ENGINEERING, 2007, 90 (01) :65-77

[10]

Di Gerlando A., 2003, European Patent, Patent No. [WO 03/103114, 03103114]

← 1 2 3 4 →